Tag Archive: 300-115 VCE Dumps

New 300-115 exam questions from PassLeader 300-115 dumps! Welcome to download the newest PassLeader 300-115 VCE and PDF dumps: http://www.passleader.com/300-115.html (971 Q&As –> 1042 Q&As –> 1132 Q&As)

P.S. Free 300-115 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpV1dGa2Q3czNVNG8

NEW QUESTION 1
Refer to the exhibit, which statement abort the current configuration on port GigabitEthernet2/0/1 is true?
!
interface GigabitEthernet2/0/1
switchport access vlan 700
switchport trunk allowed vlan 200,300,700
switchport mode trunk
end
!

A.    It is an access port configured for a phone and a PC
B.    It is a trunk port and the native VLAN is VLAN1
C.    It is a trunk port and the natrve VL AN m VLAN 700
D.    It is an access port in VLAN 700

New 300-115 exam questions from PassLeader 300-115 dumps! Welcome to download the newest PassLeader 300-115 VCE and PDF dumps: http://www.passleader.com/300-115.html (971 Q&As –> 1042 Q&As –> 1132 Q&As)

P.S. Free 300-115 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpV1dGa2Q3czNVNG8

QUESTION 131
Refer to the exhibit. A network engineer wants to analyze all incoming and outgoing packets for an interface that is connected to an access switch. Which three items must be configured to mirror traffic to a packet sniffer that is connected to the distribution switch? (Choose three.)

A.    A monitor session on the distribution switch with a physical interface as the source and the remote SPAN VLAN as the destination
B.    A remote SPAN VLAN on the distribution and access layer switch
C.    A monitor session on the access switch with a physical interface source and the remote SPAN VLAN as the destination
D.    A monitor session on the distribution switch with a remote SPAN VLAN as the source and physical interface as the destination
E.    A monitor session on the access switch with a remote SPAN VLAN source and the physical interface as the destination
F.    A monitor session on the distribution switch with a physical interface as the source and a physical interface as the destination

New 300-115 exam questions from PassLeader 300-115 dumps! Welcome to download the newest PassLeader 300-115 VCE and PDF dumps: http://www.passleader.com/300-115.html (971 Q&As –> 1042 Q&As –> 1132 Q&As)

P.S. Free 300-115 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpV1dGa2Q3czNVNG8

QUESTION 121
Drag and Drop Question

New 300-115 exam questions from PassLeader 300-115 dumps! Welcome to download the newest PassLeader 300-115 VCE and PDF dumps: http://www.passleader.com/300-115.html (971 Q&As –> 1042 Q&As –> 1132 Q&As)

P.S. Free 300-115 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpV1dGa2Q3czNVNG8

QUESTION 111
You have been asked to install and configure a new switch in a customer network. Use the console access to the existing and new switches to configure and verify correct device configuration.

You are connecting the New_Switch to the LAN topology; the switch has been partially configured and you need to complete the rest of configuration to enable PC1 communication with PC2. Which of the configuration is correct?

A.    Option A
B.    Option B
C.    Option C
D.    Option D
E.    Option E

New 300-115 exam questions from PassLeader 300-115 dumps! Welcome to download the newest PassLeader 300-115 VCE and PDF dumps: http://www.passleader.com/300-115.html (971 Q&As –> 1042 Q&As –> 1132 Q&As)

P.S. Free 300-115 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpV1dGa2Q3czNVNG8

QUESTION 101
Hotspot – HSRP
Ferris Plastics, Inc. is a medium sized company, with an enterprise network (access, distribution and core switches) that provides LAN connectivity from user PCs to corporate servers. The distribution switches are configured to use HSRPto provide a high availability solution.
– DSW1 -primary device for VLAN 101 VLAN 102 andVLAN 105
– DSW2 – primary device for VLAN 103 and VLAN 104
– A failure of GigabitEthemet1/0/1 on primary device should cause the primary device to release its status as the primary device, unless GigabitEthernet1/0/1 on backup device has also failed
Troubleshooting has identified several issues. Currently all interfaces are up. Using the running configurations and show commands, you have been asked to investigate and respond to the following question.

During routine maintenance, it became necessary to shut down the GigabitEthernet1/0/1 interface on DSW1. All other interfaces were up. During this time, DSW1 remained the active device for the VLAN 102 HSRP group. You have determined that there is an issue with the decrement value in the track command for the VLAN 102 HSRP group. What needs to be done to make the group function properly?

A.    The decrement value on DSW1 should be greaterthan 5 and less than 15.
B.    The decrement value on DSW1 should be greaterthan 9 and less than 15.
C.    The decrement value on DSW1 should be greaterthan 11 and less than 19.
D.    The decrement value on DSWTs should be greaterthan 190 and less than 200.
E.    The decrement value on DSWTs should be greaterthan 195 and less than 205.

New 300-115 exam questions from PassLeader 300-115 dumps! Welcome to download the newest PassLeader 300-115 VCE and PDF dumps: http://www.passleader.com/300-115.html (971 Q&As –> 1042 Q&As –> 1132 Q&As)

P.S. Free 300-115 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpV1dGa2Q3czNVNG8

QUESTION 91
What is the default amount by which the hot standby priority for the router is decremented or incremented when the interface goes down or comes back up?

A.    1
B.    5
C.    10
D.    15

New 300-115 exam questions from PassLeader 300-115 dumps! Welcome to download the newest PassLeader 300-115 VCE and PDF dumps: http://www.passleader.com/300-115.html (971 Q&As –> 1042 Q&As –> 1132 Q&As)

P.S. Free 300-115 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpV1dGa2Q3czNVNG8

QUESTION 71
A network engineer is trying to deploy a PC on a network. The engineer observes that when the PC is connected to the network, it takes 30 to 60 seconds for the PC to see any activity on the network interface card. Which Layer 2 enhancement can be used to eliminate this delay?

A.    Configure port duplex and speed to auto negotiation.
B.    Configure port to duplex full and speed 1000.
C.    Configure spanning-tree portfast.
D.    Configure no switchport.

New 300-115 exam questions from PassLeader 300-115 dumps! Welcome to download the newest PassLeader 300-115 VCE and PDF dumps: http://www.passleader.com/300-115.html (971 Q&As –> 1042 Q&As –> 1132 Q&As)

P.S. Free 300-115 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpV1dGa2Q3czNVNG8

QUESTION 61
Which statement about the use of PAgP link aggregation on a Cisco switch that is running Cisco IOS Software is true?

A.    PAgP modes are off, auto, desirable, and on. Only the combinations auto-desirable, desirable-desirable, and on-on allow the formation of a channel.
B.    PAgP modes are active, desirable, and on. Only the combinations active-desirable, desirable-desirable, and on-on allow the formation of a channel.
C.    PAgP modes are active, desirable, and on. Only the combinations active-active, desirable-desirable, and on-on allow the formation of a channel.
D.    PAgP modes are off, active, desirable, and on. Only the combinations auto-auto, desirable-desirable, and on-on allow the formation of a channel.