web analytics

PassLeader Valid 300-160 Dumps with VCE and PDF (Question 65 – Question 72)

New 300-160 exam questions from PassLeader 300-160 dumps! Welcome to download the newest PassLeader 300-160 VCE and PDF dumps: https://www.passleader.com/300-160.html (125 Q&As –> 150 Q&As –> 174 Q&As –> 488 Q&As)

P.S. Free 300-160 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpeVktaU1qdFl4WGs

Read More CCNP Data Center Exam Dumps:

CCNP Data Center 300-165 Exam Dumps: http://www.ciscovceplus.com/?s=300-165

CCNP Data Center 300-170 Exam Dumps: http://www.ciscovceplus.com/?s=300-170

CCNP Data Center 300-175 Exam Dumps: http://www.ciscovceplus.com/?s=300-175

CCNP Data Center 300-180 Exam Dumps: http://www.ciscovceplus.com/?s=300-180

QUESTION 65
Which Cisco technology would you specify to provide your client’s data center with context-aware identity validation and Layer 2 port authentication?

A.    Cisco Security Manager
B.    Cisco NAC Profiler
C.    Cisco TrustSec
D.    Cisco Anti-X
E.    Cisco Virtual Security Gateway

Answer: C

QUESTION 66
The client’s data center manager has requested the physical weights of the equipment in your Cisco UCS design along with the power and cooling requirements. Where in cisco.com can you find this information?

A.    the product datasheets
B.    the Cisco UCS power calculator
C.    the Cisco UCS GUI Configuration Guide
D.    the Cisco UCS Hardware Installation Guide
E.    the Hardware and Software Interoperability Matrix Utility Tool

Answer: B

QUESTION 67
Which technology differentiates a data center designed around Cisco equipment versus another vendor?

A.    NPV
B.    NPIV
C.    VSANs
D.    FCoE

Answer: C

QUESTION 68
You are planning to migrate an existing customer infrastructure to a new data center infrastructure. Existing IP addresses must be preserved during the migration. Which three design options must you implement? (Choose three.)

A.    Implement a stretched Layer 2 connection that allows for IP mobility.
B.    The transport network must provide Layer 3 connectivity between the LISP-enabled routers located in the source and destination data centers.
C.    The transport network must provide Layer 2 connectivity between the Cisco FabricPath-enabled routers located in the source and destination data centers.
D.    The transport network must provide Layer 3 connectivity between the OTV-enabled routers located in the source and destination data centers.
E.    The default gateway in each data center is configured to have the same virtual IP address.
F.    The MAC address of the default gateway must be preserved in the new data center.
G.    IS-IS must be configured between the data centers to enable Cisco FabricPath functionality.

Answer: ABE

QUESTION 69
Which two statements accurately describe NPV on a Cisco Nexus 5000 Series Switch? (Choose two.)

A.    Enabling NPV mode is disruptive to the network.
B.    NPV requires a license for FCoE.
C.    NPV is Cisco-proprietary.
D.    The NPV switch supports N ports and F ports.
E.    In-order data delivery is required in NPV mode.

Answer: AB

QUESTION 70
Which two options are valid methods for configuring VLANs on a Cisco UCS cluster? (Choose two.)

A.    globally per Cisco UCS cluster
B.    by using Cisco UCS Fabric Interconnect
C.    by using vPC domain configuration
D.    by using VTP
E.    by using CFS

Answer: AB
Explanation:
http://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-2104xp-fabric-extender/110517-vlan-config-ucs.html

QUESTION 71
Which software runs on a device that is connected to a TrustSec-enabled port?

A.    Requester
B.    Authenticator
C.    Supplicant
D.    Authentication Proxy

Answer: C

QUESTION 72
Which component of a Cisco Nexus 1000V Series switch is responsible for propagating configurations to virtual switches?

A.    SUP
B.    FEX
C.    VSM
D.    VEM

Answer: C
Explanation:
– Product Architecture: The Cisco Nexus 1000V Series Switch has two major components (Figure 1): the virtual Ethernet module (VEM), which runs inside the hypervisor, and the virtual supervisor module (VSM), which manages the VEMs.
– Virtual Supervisor Module: The Cisco Nexus 1000V Series VSM controls multiple VEMs as one logical modular distributed virtual switch. Configuration is performed through the VSM and is automatically propagated to the VEMs.
http://www.cisco.com/c/en/us/products/collateral/switches/nexus-1000v-switch-vmware-vsphere/data_sheet_c78-492971.html


New 300-160 exam questions from PassLeader 300-160 dumps! Welcome to download the newest PassLeader 300-160 VCE and PDF dumps: https://www.passleader.com/300-160.html (125 Q&As –> 150 Q&As –> 174 Q&As –> 488 Q&As)

P.S. Free 300-160 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpeVktaU1qdFl4WGs

Read More CCNP Data Center Exam Dumps:

CCNP Data Center 300-165 Exam Dumps: http://www.ciscovceplus.com/?s=300-165

CCNP Data Center 300-170 Exam Dumps: http://www.ciscovceplus.com/?s=300-170

CCNP Data Center 300-175 Exam Dumps: http://www.ciscovceplus.com/?s=300-175

CCNP Data Center 300-180 Exam Dumps: http://www.ciscovceplus.com/?s=300-180