web analytics

PassLeader Valid 300-080 Dumps with VCE and PDF (Question 36 – Question 45)

New 300-080 exam questions from PassLeader 300-080 dumps! Welcome to download the newest PassLeader 300-080 VCE and PDF dumps: http://www.passleader.com/300-080.html (333 Q&As –> 369 Q&As –> 383 Q&As)

P.S. Free 300-080 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpZ0owZW9faW9hbzQ

Read More CCNP Collaboration Exam Dumps:

CCNP Collaboration 300-070 Exam Dumps: http://www.ciscovceplus.com/?s=300-070

CCNP Collaboration 300-075 Exam Dumps: http://www.ciscovceplus.com/?s=300-075

CCNP Collaboration 300-085 Exam Dumps: http://www.ciscovceplus.com/?s=300-085

QUESTION 36
Refer to topology and Exhibits below:
passleader-300-080-dumps-361
passleader-300-080-dumps-362
passleader-300-080-dumps-363
passleader-300-080-dumps-364
Which command can be used to obtain the status of an MGCP gateway from the IOS device, as shown in the given output?

A.    show mgcp registration
B.    show mgcp-gw
C.    show mgcp connection
D.    show ccm-manager

Answer: D

QUESTION 37
Refer to topology and Exhibits below:
passleader-300-080-dumps-371
passleader-300-080-dumps-372
passleader-300-080-dumps-373
passleader-300-080-dumps-374
What is the reason that this MGCP gateway is not registered with Cisco Unified Communications Manager?

A.    The primary server address is incorrect.
B.    The MGCP domain name is incorrect on either the Cisco Unified Communications Manager or the router.
C.    Backhaul/Redundant link port is incorrect
D.    This MGCP gateway is not down; it is operational.

Answer: B

QUESTION 38
Refer to topology and Exhibits below:
passleader-300-080-dumps-381
passleader-300-080-dumps-382
passleader-300-080-dumps-383
passleader-300-080-dumps-384
After making a change to a manually configured MGCP gateway, what step should you take to ensure that the gateway accepts the changes and be operational?

A.    Issue the commands no MGCP, then MGCP.
B.    Issue the commands no SCCP. then SCCP.
C.    Issue the commands Shut, then no shut.
D.    Issue the commands no CCM. then CCM.

Answer: A

QUESTION 39
Refer to topology and Exhibits below:
passleader-300-080-dumps-391
passleader-300-080-dumps-392
passleader-300-080-dumps-393
passleader-300-080-dumps-394
passleader-300-080-dumps-395
passleader-300-080-dumps-396
passleader-300-080-dumps-397
passleader-300-080-dumps-398
A call from HQ Phone 1 with the extension of 2001 is dialing a SX20 that is registered to the VCS in BackBone (not shown). Determine if the call fails and if so, what are the two causes? (Choose two.)

A.    The call succeeds
B.    The call fails
C.    There are no issues, so the call succeeds
D.    The SIP port is incorrect on the Cisco Unified Communications Manager SIP trunk
E.    The Local Zone Match Rule state is disabled
F.    Rule name UCM2 is set to stop on Match

Answer: BF

QUESTION 40
Refer to topology and Exhibits below:
passleader-300-080-dumps-401
passleader-300-080-dumps-402
passleader-300-080-dumps-403
passleader-300-080-dumps-404
passleader-300-080-dumps-405
passleader-300-080-dumps-406
passleader-300-080-dumps-407
passleader-300-080-dumps-408
A call from a SX20 in the BackBone (not shown) with a URI extension is dialing a HQ Ph 1 that is registered to the HQ CUCM. Determine if the call fails and if so, what are the two causes? (Choose two).

A.    The call succeeds
B.    The call fails
C.    There are no issues, so the call succeeds
D.    The SIP port is incorrect on the Cisco Unified Communications Manager CUCM SIP trunk
E.    The Local Zone Match Rule state is disabled
F.    Rule name UCM2 is set to stop on Match

Answer: AC

QUESTION 41
An IP phone that is connected through a Cisco Catalyst 3750 Series Switch is failing to register with the subscriber as a backup server. When the user presses the settings button on the phone, only the Cisco Unified Communications Manager publisher shows as registered. What is the most likely cause for this issue?

A.    The phone does not have the correct Cisco Unified Communications Manager group in the device configuration page.
B.    The Cisco Unified Communications Manager group that is applied through the device pool is misconfigured.
C.    The ip-helper address command for the subscriber is not configured on the switch port.
D.    The subscriber does not have the correct device pool configured.
E.    The enterprise phone configuration does not have the call control redundancy enabled.

Answer: B

QUESTION 42
Refer to the exhibit. An IP phone that is connected through a Cisco Catalyst 3750 Series Switch is failing to register with Cisco Unified Communications Manager. When the user presses the settings button on the phone, the Operational VLAN ID shows a blank entry. What is the most likely cause for this issue?
passleader-300-080-dumps-421

A.    The switch may not be supplying inline power.
B.    The spanning tree portfast command needs to be removed.
C.    The trunk encapsulation is missing. The trunk must be configured for dot1.Q.
D.    Cisco Discovery Protocol is disabled on the switch.
E.    The Operational VLAN ID of the phone always shows as blank. The Admin VLAN ID should be 110.

Answer: D

QUESTION 43
You configured a Cisco ISR G2 as a SIP gateway, but the gateway does not show that it is registered with Cisco Unified Communications Manager. What is causing this issue?

A.    Cisco Unified Communications Manager does not support SIP gateways.
B.    The gateway does not have the UC license installed.
C.    The gateway does not have Cisco Unified Border Element session licensing.
D.    Cisco Unified Communications Manager does not show a SIP gateway as registered if it is not properly configured.
E.    Cisco Unified Communications Manager never shows a SIP gateway as registered even when it is properly configured.
F.    The Cisco ISR G2 cannot be a SIP gateway.

Answer: E

QUESTION 44
Which issue would cause an MGCP gateway to fail to register with Cisco Unified Communications Manager?

A.    missing the configuration command isdn bind-l3 ccm-manager under the ISDN interface
B.    mismatched domain name on the MGCP gateway and Cisco Unified Communications Manager gateway configuration
C.    misconfigured route group in Cisco Unified Communications Manager
D.    incorrect MGCP IP address specified in the gateway configuration in Cisco Unified Communications Manager

Answer: B

QUESTION 45
Endpoints are configured for both H.323 and SIP using the same URI and Cisco VCS settings, but the endpoints register only as H.323 endpoints. What is causing this issue?

A.    A firewall is blocking all traffic from the endpoints to the Cisco VCS.
B.    The Cisco VCS has no SIP domains configured.
C.    The Cisco VCS is blocking the endpoints because of duplicate ID entries.
D.    The endpoints do not have the SIP option key installed.
E.    SIP does not work, because SIP is used for Cisco Unified Communications Manager registration only.

Answer: B


New 300-080 exam questions from PassLeader 300-080 dumps! Welcome to download the newest PassLeader 300-080 VCE and PDF dumps: http://www.passleader.com/300-080.html (333 Q&As –> 369 Q&As –> 383 Q&As)

P.S. Free 300-080 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpZ0owZW9faW9hbzQ

Read More CCNP Collaboration Exam Dumps:

CCNP Collaboration 300-070 Exam Dumps: http://www.ciscovceplus.com/?s=300-070

CCNP Collaboration 300-075 Exam Dumps: http://www.ciscovceplus.com/?s=300-075

CCNP Collaboration 300-085 Exam Dumps: http://www.ciscovceplus.com/?s=300-085