web analytics

PassLeader 100-105 Exam Dumps Collection with VCE and PDF (Question 101 – Question 110)

New 100-105 exam questions from PassLeader 100-105 dumps! Welcome to download the newest PassLeader 100-105 VCE and PDF dumps: http://www.passleader.com/100-105.html (649 Q&As –> 729 Q&As –> 825 Q&As –> 863 Q&As)

P.S. Free 100-105 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpZHliX0lUeE1Ccms

QUESTION 101
An administrator must assign static IP addresses to the servers in a network. For network 192.168.20.24/29, the router is assigned the first usable host address while the sales server is given the last usable host address. Which of the following should be entered into the IP properties box for the sales server?

A.    IP address: 192.168.20.14
Subnet Mask: 255.255.255.248
Default Gateway: 192.168.20.9
B.    IP address: 192.168.20.254
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.20.1
C.    IP address: 192.168.20.30
Subnet Mask: 255.255.255.248
Default Gateway: 192.168.20.25
D.    IP address: 192.168.20.30
Subnet Mask: 255.255.255.240
Default Gateway: 192.168.20.17
E.    IP address: 192.168.20.30
Subnet Mask: 255.255.255.240
Default Gateway: 192.168.20.25

Answer: C

QUESTION 102
What is the default administrative distance of the OSPF routing protocol?

A.    90
B.    100
C.    110
D.    120
E.    130
F.    170

Answer: C

QUESTION 103
What is the subnet address for the IP address 172.19.20.23/28?

A.    172.19.20.0
B.    172.19.20.15
C.    172.19.20.16
D.    172.19.20.20
E.    172.19.20.32

Answer: C

QUESTION 104
The network administrator has found the following problem. The remote networks 172.16.10.0, 172.16.20.0, and 172.16.30.0 are accessed through the Central router’s serial 0/0 interface. No users are able to access 172.16.20.0. After reviewing the command output shown in the graphic, what is the most likely cause of the problem?
PassLeader-100-105-dumps-1041

A.    no gateway of last resort on Central
B.    Central router’s not receiving 172.16.20.0 update
C.    incorrect static route for 172.16.20.0
D.    172.16.20.0 not located in Central’s routing table

Answer: C

QUESTION 105
Refer to the exhibit. The output is from a router in a large enterprise. From the output, determine the role of the router.
PassLeader-100-105-dumps-1051

A.    A Core router.
B.    The HQ Internet gateway router.
C.    The WAN router at the central site.
D.    Remote stub router at a remote site.

Answer: D

QUESTION 106
Refer to the exhibit. For security reasons, information about RTA, including platform and IP addresses, should not be accessible from the Internet. This information should, however, be accessible to devices on the internal networks of RTA. Which command or series of commands will accomplish these objectives?
PassLeader-100-105-dumps-1061

A.    RTA(config)#no cdp run
B.    RTA(config)#no cdp enable
C.    RTA(config)#interface s0/0
RTA(config-if)#no cdp run
D.    RTA(config)#interface s0/0
RTA(config-if)#no cdp enable

Answer: D

QUESTION 107
Refer to the exhibit. The two connected ports on the switch are not turning orange or green. What would be the most effective steps to troubleshoot this physical layer problem? (Choose three.)
PassLeader-100-105-dumps-1071

A.    Ensure that the Ethernet encapsulations match on the interconnected router and switch ports.
B.    Ensure that cables A and B are straight-through cables.
C.    Ensure cable A is plugged into a trunk port.
D.    Ensure the switch has power.
E.    Reboot all of the devices.
F.    Reseat all cables.

Answer: BDF

QUESTION 108
Wich command can you use to manually assign a static IPV6 address to a router interface?

A.    ipv6 address PREFIX_1::1/64
B.    ipv6 autoconfig 2001:db8:2222:7272::72/64
C.    ipv6 autoconfig
D.    ipv6 address 2001:db8:2222:7272::72/64

Answer: D

QUESTION 109
The network administrator is using a Windows PC application that is called putty.exe for remote communication to a switch for network troubleshooting. Which two protocols could be used during this communication? (Choose two).

A.    SNMP
B.    HTTP
C.    Telnet
D.    RMON
E.    SSH

Answer: CE

QUESTION 110
What should be part of a comprehensive network security plan?

A.    Allow users to develop their own approach to network security.
B.    Physically secure network equipment from potential access by unauthorized individuals.
C.    Encourage users to use personal information in their passwords to minimize the likelihood of passwords being forgotten.
D.    Delay deployment of software patches and updates until their effect on end-user equipment is well known and widely reported.
E.    Minimize network overhead by deactivating automatic antivirus client updates.

Answer: B


New 100-105 exam questions from PassLeader 100-105 dumps! Welcome to download the newest PassLeader 100-105 VCE and PDF dumps: http://www.passleader.com/100-105.html (649 Q&As –> 729 Q&As –> 825 Q&As –> 863 Q&As)

P.S. Free 100-105 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpZHliX0lUeE1Ccms