New 640-911 exam questions from PassLeader 640-911 dumps! Welcome to download the newest PassLeader 640-911 VCE and PDF dumps: http://www.passleader.com/640-911.html (220 Q&As)
P.S. Free 640-911 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpflQtTWl3Xy0tWUhtMDlETVNKZVNqSFN4STRZSnRwdTZpUzB0aDNFLVlzMGs
QUESTION 16
What is the binary value of the decimal number 1263?
A. 11011101101
B. 10011101111
C. 10011101011
D. 11010001111
E. 10111101111
Answer: B
Explanation:
Decimal 1263
Binary 10011101111
Hexadecimal 0x4ef
Roman MCCLXIII
Dotted decimal 0.0.4.239
QUESTION 17
What are three modular Layer 2 processes in Cisco Nexus Operating System? (Choose three.)
A. UDLD
B. PIM
C. HSRP
D. STP
E. Cisco Discovery Protocol
F. OSPF
Answer: ADE
Explanation:
“PIM is IP routing protocol-independent and can leverage whichever unicast routing protocols are used to populate the unicast routing table, including Enhanced Interior Gateway Routing Protocol (EIGRP), Open Shortest Path First (OSPF), Border Gateway Protocol (BGP), and static routes. PIM uses this unicast routing information to perform the multicast forwarding function. Although PIM is called a multicast routing protocol, it actually uses the unicast routing table to perform the RPF check function instead of building up a completely independent multicast routing table. Unlike other routing protocols, PIM does not send and receive routing updates between routers.”
http://www.cisco.com/en/US/docs/ios/solutions_docs/ip_multicast/White_papers/mcst_ovr.html#wp1009068
“Hot Standby Router Protocol (HSRP) is a Cisco proprietary redundancy protocol for establishing a faulttolerant default gateway. In the configuration procedures, the specified interface must be a Layer 3 interface.”
http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_55_se/configuration/guide/swhsrp.html
OSPF (Open Shortest Path First) – routing protocol.
QUESTION 18
What are three modular Layer 3 processes in Cisco Nexus Operating System? (Choose three.)
A. UDLD
B. PIM
C. HSRP
D. STP
E. OSPF
F. Cisco Discovery Protocol
Answer: BCE
Explanation:
“PIM is IP routing protocol-independent and can leverage whichever unicast routing protocols are used to populate the unicast routing table, including Enhanced Interior Gateway Routing Protocol (EIGRP), Open Shortest Path First (OSPF), Border Gateway Protocol (BGP), and static routes. PIM uses this unicast routing information to perform the multicast forwarding function. Although PIM is called a multicast routing protocol, it actually uses the unicast routing table to perform the RPF check function instead of building up a completely independent multicast routing table. Unlike other routing protocols, PIM does not send and receive routing updates between routers.”
http://www.cisco.com/en/US/docs/ios/solutions_docs/ip_multicast/White_papers/mcst_ovr.html#wp1009068
“Hot Standby Router Protocol (HSRP) is a Cisco proprietary redundancy protocol for establishing a fault tolerant default gateway. In the configuration procedures, the specified interface must be a Layer 3 interface.”
http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_55_se/configuration/guide/swhsrp.html
OSPF (Open Shortest Path First) – routing protocol.
QUESTION 19
What are two default user roles in Cisco Nexus Operating System? (Choose two.)
A. Admin
B. Network Operator
C. Operator
D. Storage Operator
E. Root
F. System Manager
Answer: AB
Explanation:
“The Nexus 5000 Series switch provides the following default user roles:
Network-admin (superuser) — Complete read and write access to the entire Nexus 5000 Series switch.
Network-operator — Complete read access to the Nexus 5000 Series switch.”
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli_rel_4_0_1a/sec_rbac.html#wp1230629
QUESTION 20
On most keyboards, the Up arrow and Down arrow keys move through the command history. Which two key sequences can be used as alternatives? (Choose two.)
A. Alt-A
B. Alt-F
C. Alt-N
D. Alt-E
E. Alt-P
Answer: CE
Explanation:
“Alt-P History search backwards, Alt-N History search forwards”
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli_rel_4_0_1a/begin.html
QUESTION 21
What is the function of the Tab key on the Cisco Nexus Operating System command-line interface?
A. redisplays the current command line
B. deletes all characters from the cursor to the end of the command line
C. clears the terminal screen
D. completes a partially entered command if enough characters are present
E. moves the cursor one word to the right
Answer: D
Explanation:
“Completes the word for you after entering the first characters of the word, and then pressing the Tab key. All options that match are presented.”
http://www.cisco.com/en/US/docs/switches/datacenter/sw/4_1/nx-os/fundamentals/configuration/guide/Cisco_Nexus_7000_Series_NX-OS_Fundamentals_Configuration_Guide__Release_4.1_chapter4.html
QUESTION 22
Where does Cisco Nexus Operating System store the running configuration file?
A. RAM
B. flash
C. bootflash
D. volatile
E. NVRAM
Answer: A
Explanation:
“The ‘running-config’ file is stored in RAM.”
http://www.omnisecu.com/cisco-certified-network-associate-ccna/cisco-router-configuration-files.php
QUESTION 23
Where does Cisco Nexus Operating System store the startup configuration file?
A. RAM
B. flash
C. bootflash
D. volatile
E. NVRAM
Answer: E
Explanation:
“A persistent copy of Cisco Router configuration file is called as ‘startup-config’ file. The ‘startup-config’ file is kept in NVRAM and the contents of the ‘startup-config’ file are retained after a reboot.”
http://www.omnisecu.com/cisco-certified-network-associate-ccna/cisco-router-configuration-files.php
QUESTION 24
Which two commands would you use to erase the Cisco Nexus Operation System configuration and return the switch to factory defaults? (Choose two.)
A. nexus# write erase boot
B. nexus# erase configuration
C. nexus# erase running-configuration
D. nexus# erase startup-configuration
E. nexus# reboot
F. nexus# reload
G. nexus# shutdown
Answer: AF
QUESTION 25
What is the minimum required command to enter global configuration mode on a Cisco Nexus switch?
A. nexus# con
B. nexus# configure
C. nexus# configure global
D. nexus# configure terminal
Answer: A
Explanation:
Example:
NX# con
Enter configuration commands, one per line. End with CNTL/Z
NX(config)#
P.S. in IOS minimum “conf t”
QUESTION 26
Which option would you use to exit the Cisco Nexus Operating System interface configuration mode and return to the exec prompt?
A. nexus(config-if)#Ctrl-C
nexus#
B. nexus(config-if)#Ctrl-Z
nexus#
C. nexus(config-if)#Ctrl-E
nexus#
D. nexus(config-if)#exit
nexus#
Answer: B
Explanation:
“Ctrl-Z Ends a configuration session, and returns you to EXEC mode. When used at the end of a command line in which a valid command has been typed, the resulting configuration is first added to the running configuration file.”
http://www.cisco.com/en/US/docs/switches/datacenter/sw/4_1/nx-os/fundamentals/configuration/guide/Cisco_Nexus_7000_Series_NX-OS_Fundamentals_Configuration_Guide__Release_4.1_chapter4.html
P.S. “exit” return to global config only
QUESTION 27
What is the correct format of an access control list on a Cisco Nexus switch to deny unencrypted Web traffic from any source to destination host 10.10.1.110?
A. N5K-A(config)#ip access-list 101
N5K-A(config-acl)# deny tcp any host 10.10.1.110 eq 80
B. N5K-A(config)#access-list 101deny tcp any host 10.10.1.110 eq 80
C. N5K-A(config)#access-list 101deny tcp any host 10.10.1.110 eq 80
N5K-A(config)#access-list 101permit ip any any
D. N5K-A(config)# ip access-list 101
N5K-A(config-acl)# deny tcp any host 10.10.1.110 eq 80
N5K-A(config-acl)# permit ip any any
Answer: D
QUESTION 28
What is the correct format of an access control list on a Cisco Nexus switch to deny FTP traffic from any source to destination host 10.10.1.110?
A. N5K-A(config)# ip access-list 101
N5K-A(config-acl)# deny tcp any host 10.10.1.110 eq ftp
B. N5K-A(config)#access-list 101deny tcp any host 10.10.1.110 eq ftp
C. N5K-A(config)#access-list 101deny tcp any host 10.10.1.110 eq ftp
N5K-A(config)#access-list 101denyip any any
D. N5K-A(config)# ip access-list 101
N5K-A(config-acl)# denyudp any host 10.10.1.110 eq 21
N5K-A(config-acl)# permit ip any any
E. N5K-A(config)# ip access-list 101
N5K-A(config-acl)# deny tcp any host 10.10.1.110 eq 21
N5K-A(config-acl)# permit ip any any
Answer: E
QUESTION 29
What is the correct format of an access control list on a Cisco Nexus switch to deny hosts on the 172.16.1.0/21 network from accessing HTTP proxy servers listening on port 8080?
A. N5K-A(config)# ip access-list 101
N5K-A(config-acl)# deny tcp 172.16.1.0 0.0.7.255 any eq 8080
N5K-A(config-acl)# permit ip any any
B. N5K-A(config)# ip access-list 101
N5K-A(config-acl)# deny tcp any 172.16.1.0 255.255.248.0 eq 8080
N5K-A(config-acl)# permit ip any any
C. N5K-A(config)#access-list 101 deny tcp172.16.1.0 0.0.15.255 eq 8080
D. N5K-A(config)# ip access-list 101
N5K-A(config-acl)# deny tcp any host 172.16.1.0/21 eq 8080
Answer: A
QUESTION 30
What is the correct format of an access control list on a Cisco Nexus switch to only permit unencrypted Web traffic from the 172.16.1.0/25 network to destination host 10.10.1.110?
A. N5K-A(config)# ip access-list 101
N5K-A(config-acl)# permit tcp host 172.16.1.0/25 any eq 80
B. N5K-A(config)# ip access-list 101
N5K-A(config-acl)# permit tcp 172.16.1.0 255.255.255.128 any eq 80
C. N5K-A(config)# ip access-list 101
N5K-A(config-acl)# permit tcp 172.16.1.0/25 any eq 80
D. N5K-A(config)#access-list 101 permit tcp 172.16.1.0/25 0.0.0.128 eq 80
E. N5K-A(config)# ip access-list 101
N5K-A(config-acl)# permit tcp any 172.16.1.0 255.255.248.0 eq 80
Answer: C
New 640-911 exam questions from PassLeader 640-911 dumps! Welcome to download the newest PassLeader 640-911 VCE and PDF dumps: http://www.passleader.com/640-911.html (220 Q&As)
P.S. Free 640-911 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpflQtTWl3Xy0tWUhtMDlETVNKZVNqSFN4STRZSnRwdTZpUzB0aDNFLVlzMGs
