New 300-208 exam questions from PassLeader 300-208 dumps! Welcome to download the newest PassLeader 300-208 VCE and PDF dumps: http://www.passleader.com/300-208.html (430 Q&As –> 451 Q&As –> 508 Q&As –> 531 Q&As)
P.S. Free 300-208 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpfkFleG9jUGxxS3kwS0VwcllTWmlxdTlBZUd5cnBkaG5DSE5FbU5yOEpYQzQ
QUESTION 1
How frequently does the Profiled Endpoints dashlet refresh data?
A. every 30 seconds
B. every 60 seconds
C. every 2 minutes
D. every 5 minutes
Answer: B
QUESTION 2
Which command in the My Devices Portal can restore a previously lost device to the network?
A. Reset
B. Found
C. Reinstate
D. Request
Answer: C
QUESTION 3
What is the first step that occurs when provisioning a wired device in a BYOD scenario?
A. The smart hub detects that the physically connected endpoint requires configuration and must use MAB to authenticate.
B. The URL redirects to the Cisco ISE Guest Provisioning portal.
C. Cisco ISE authenticates the user and deploys the SPW package.
D. The device user attempts to access a network URL.
Answer: A
QUESTION 4
Which three features should be enabled as best practices for MAB? (Choose three.)
A. MD5
B. IP source guard
C. DHCP snooping
D. storm control
E. DAI
F. URPF
Answer: BCE
QUESTION 5
When MAB is configured, how often are ports reauthenticated by default?
A. every 60 seconds
B. every 90 seconds
C. every 120 seconds
D. never
Answer: D
QUESTION 6
What is a required step when you deploy dynamic VLAN and ACL assignments?
A. Configure the VLAN assignment.
B. Configure the ACL assignment.
C. Configure Cisco IOS Software 802.1X authenticator authorization.
D. Configure the Cisco IOS Software switch for ACL assignment.
Answer: C
QUESTION 7
Which model does Cisco support in a RADIUS change of authorization implementation?
A. push
B. pull
C. policy
D. security
Answer: A
QUESTION 8
You are finding that the 802.1X-configured ports are going into the error-disable state. Which command will show you the reason why the port is in the error-disable state, and which command will automatically be re-enabled after a specific amount of time? (Choose two.)
A. show error-disable status
B. show error-disable recovery
C. show error-disable flap-status
D. error-disable recovery cause security-violation
E. error-disable recovery cause dot1x
F. error-disable recovery cause l2ptguard
Answer: BD
QUESTION 9
Which of these is a configurable Cisco IOS feature that triggers notifications if an attack attempts to exhaust critical router resources and if preventative controls have been bypassed or are not working correctly?
A. Control Plane Protection
B. Management Plane Protection
C. CPU and memory thresholding
D. SNMPv3
Answer: C
QUESTION 10
Which administrative role has permission to assign Security Group Access Control Lists?
A. System Admin
B. Network Device Admin
C. Policy Admin
D. Identity Admin
Answer: C
QUESTION 11
Refer to the exhibit. If the given configuration is applied to the object-group vpnservers, during which time period are external users able to connect?
A. From Friday at 6:00 p.m. until Monday at 8:00 a.m.
B. From Monday at 8:00 a.m. until Friday at 6:00 p.m.
C. From Friday at 6:01 p.m. until Monday at 8:01 a.m.
D. From Monday at 8:01 a.m. until Friday at 5:59 p.m.
Answer: D
QUESTION 12
Which set of commands allows IPX inbound on all interfaces?
A. ASA1(config)# access-list IPX-Allow ethertype permit ipx
ASA1(config)# access-group IPX-Allow in interface global
B. ASA1(config)# access-list IPX-Allow ethertype permit ipx
ASA1(config)# access-group IPX-Allow in interface inside
C. ASA1(config)# access-list IPX-Allow ethertype permit ipx
ASA1(config)# access-group IPX-Allow in interface outside
D. ASA1(config)# access-list IPX-Allow ethertype permit ipx
ASA1(config)# access-group IPX-Allow out interface global
Answer: A
QUESTION 13
Which command enables static PAT for TCP port 25?
A. nat (outside,inside) static 209.165.201.3 209.165.201.226 eq smtp
B. nat static 209.165.201.3 eq smtp
C. nat (inside,outside) static 209.165.201.3 service tcp smtp smtp
D. static (inside,outside) 209.165.201.3 209.165.201.226 netmask 255.255.255.255
Answer: C
QUESTION 14
Which command is useful when troubleshooting AAA Authentication between a Cisco router and the AAA server?
A. test aaa-server test cisco cisco123 all new-code
B. test aaa group7 tacacs+ auth cisco123 new-code
C. test aaa group tacacs+ cisco cisco123 new-code
D. test aaa-server tacacs+ group7 cisco cisco123 new-code
Answer: C
QUESTION 15
In a multi-node ISE deployment, backups are not working on the MnT node. Which ISE CLI option would help mitigate this issue?
A. repository
B. ftp-url
C. application-bundle
D. collector
Answer: A
New 300-208 exam questions from PassLeader 300-208 dumps! Welcome to download the newest PassLeader 300-208 VCE and PDF dumps: http://www.passleader.com/300-208.html (430 Q&As –> 451 Q&As –> 508 Q&As –> 531 Q&As)
P.S. Free 300-208 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpfkFleG9jUGxxS3kwS0VwcllTWmlxdTlBZUd5cnBkaG5DSE5FbU5yOEpYQzQ
