web analytics

642-980 VCE Dumps

100% Pass Ensure 642-980 Dumps with Free VCE and PDF (Question 91 – Question 100)

New 642-980 exam questions from PassLeader 642-980 dumps! Welcome to download the newest PassLeader 642-980 VCE and PDF dumps: http://www.passleader.com/642-980.html (159 Q&As)

P.S. Free 642-980 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpTzdneFVwVXV2b00

QUESTION 91
What are the two most common causes of the “SFP validation failed” error on an interface when you attempt to connect a Cisco Nexus 2148T Fabric Extender to a Cisco Nexus 5548UP Switch? (Choose two).

A.    The incorrect license has been applied on the Cisco Nexus 5548UP.
B.    The port must be in switchport monitor mode.
C.    The wrong speed is configured on the interface.
D.    The wrong switchport mode is configured on the interface.
E.    It is a hardware limitation of the Cisco Nexus 2148T.

Valid 642-980 Dumps with VCE and PDF for Free (Question 81 – Question 90)

New 642-980 exam questions from PassLeader 642-980 dumps! Welcome to download the newest PassLeader 642-980 VCE and PDF dumps: http://www.passleader.com/642-980.html (159 Q&As)

P.S. Free 642-980 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpTzdneFVwVXV2b00

QUESTION 81
OTV is configured ?test pings confirm that it is working but other tests do not seem to perform well. What is the problem?

A.    VLANs are not properly extended
B.    The overlay may not be enabled
C.    The transport network is not configured to process the overhead that is introduced by the OTV
D.    The multicast groups are not defined properly

New 642-980 Dumps with VCE and PDF from PassLeader (Question 71 – Question 80)

New 642-980 exam questions from PassLeader 642-980 dumps! Welcome to download the newest PassLeader 642-980 VCE and PDF dumps: http://www.passleader.com/642-980.html (159 Q&As)

P.S. Free 642-980 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpTzdneFVwVXV2b00

QUESTION 71
Refer to the exhibit. In the initial SAN deployment or after topology changes in the SAN, some hosts cannot communicate with storage. What are three possible causes of the problem? (Choose three.)
passleader-642-980-dumps-711

A.    misconfigured fabric timers
B.    misconfigured port parameters
C.    VSAN pruning
D.    VSAN trunking issues
E.    VLAN problems
F.    mismatched zoning

Free PassLeader 642-980 Exam Dumps with VCE and PDF Download (Question 61 – Question 70)

New 642-980 exam questions from PassLeader 642-980 dumps! Welcome to download the newest PassLeader 642-980 VCE and PDF dumps: http://www.passleader.com/642-980.html (159 Q&As)

P.S. Free 642-980 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpTzdneFVwVXV2b00

QUESTION 61
A customer is troubleshooting FCoE in its network. They have discovered that vFC is currently down and there is no active STP port state on the bound Ethernet interface. What should the STP port state be to correct this issue?

A.    The bound interface should be in an STP forwarding state for the native VLAN only.
B.    The bound interface should be in an STP learning state for both the native VLAN and the member FCoE VLAN that is mapped to the active VSAN.
C.    The bound interface should be in an STP forwarding state for both the native VLAN and the member FCoE VLAN that is mapped to the active VSAN.
D.    The bound interface should be in an STP blocking state for both the native VLAN and the member FCoE VLAN that is mapped to the active VSAN.

Cisco CCNP Data Center 642-980 Dumps With VCE and PDF Download (Question 51 – Question 60)

New 642-980 exam questions from PassLeader 642-980 dumps! Welcome to download the newest PassLeader 642-980 VCE and PDF dumps: http://www.passleader.com/642-980.html (159 Q&As)

P.S. Free 642-980 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpTzdneFVwVXV2b00

QUESTION 51
Which command displays the traffic statistics for a port channel interface?

A.    show interface port-channel channel-number
B.    show port-channel traffic
C.    show port-channel usage
D.    show port-channel compatibility-parameters

Premium PassLeader 642-980 Dumps with VCE and PDF Download (Question 41 – Question 50)

New 642-980 exam questions from PassLeader 642-980 dumps! Welcome to download the newest PassLeader 642-980 VCE and PDF dumps: http://www.passleader.com/642-980.html (159 Q&As)

P.S. Free 642-980 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpTzdneFVwVXV2b00

QUESTION 41
Refer to the exhibit. VSAN traffic is not being routed through SAN fabric. Which action is helpful to resolve the problem?
passleader-642-980-dumps-411

A.    Make sure that the FSPF hello interval value matches on both switches.
B.    Change the FSPF hello timer back to the default of 5 seconds.
C.    Make sure that the FSPF hello timers are different so that they do not compete.
D.    Make sure that the FSPF dead timers are both set to 0.

100% Pass Guarantee PassLeader 642-980 Dumps with VCE and PDF for Free (Question 31 – Question 40)

New 642-980 exam questions from PassLeader 642-980 dumps! Welcome to download the newest PassLeader 642-980 VCE and PDF dumps: http://www.passleader.com/642-980.html (159 Q&As)

P.S. Free 642-980 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpTzdneFVwVXV2b00

QUESTION 31
There is an ARP storm in VDC 1. Some users on VDC 2 notice that ARP is not resolving for their gateway on the Cisco Nexus core. What is the cause?

A.    The ARP CoPP class committed information rate is exceeded, resulting in ARP loss in all VDCs.
B.    The administrator has not correctly configured the ARP CoPP class in VDC 2.
C.    The ARP traffic in VDC 1 is copied to the host ports in VDC 2, causing overutilization and output discards.
D.    Because the ARP process in the default VDC (VDC 1) is responsible for processing ARP traffic for all VDCs, VDC 2 will be affected.

PassLeader 642-980 Exam Dumps Collection with VCE and PDF (Question 21 – Question 30)

New 642-980 exam questions from PassLeader 642-980 dumps! Welcome to download the newest PassLeader 642-980 VCE and PDF dumps: http://www.passleader.com/642-980.html (159 Q&As)

P.S. Free 642-980 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpTzdneFVwVXV2b00

QUESTION 21
A customer calls you to report that it receives an error when entering the pinning max-links 4 command in FEX configuration mode on its Cisco Nexus 5596T Switch. Which of these is a likely cause for this condition?

A.    The FEX fabric interface is down.
B.    The transceiver is incorrect.
C.    A fabric interface is in a port channel.
D.    The fabric interface switchport mode is set to Access.
E.    Only two fabric interfaces are connected.

Pages:  1 2