New 2020 CCNP 300-610 DCID exam questions from PassLeader 300-610 dumps! Welcome to download the newest PassLeader 300-610 VCE and PDF dumps: https://www.passleader.com/300-610.html (173 Q&As –> 260 Q&As)
P.S. Free 2020 CCNP 300-610 DCID dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=1c_jCRX5tmsM6Qv8wc94o-MtnPkY936As
NEW QUESTION 161
An engineer must design a secondary site to prevent a catastrophic primary site failure. The applications must communicate across sites via the data link layer of the OSI model. The Layer 3 transport that is available for this solution consists of 10-Gb connections over Layer 3. Which two solutions meet these requirements? (Choose two.)
A. OTV
B. vPC
C. OSPF
D. IS-IS
E. VXLAN EVPN
Answer: AE
NEW QUESTION 162
An engineer enables the HSRP feature on a Cisco Nexus 7000 Series Switch. It must be ensured that the switch manages packets that are sent to the local vPC MAC address, remote vPC MAC address, and HSRP virtual MAC address. Which command accomplishes this goal?
A. peer-switch
B. peer-gateway
C. map-server
D. hsrp preempt
Answer: D
NEW QUESTION 163
A network engineer must design a data center network with four Cisco Nexus 7706 switches. The switches will be installed in primary and secondary data centers in vPC domains. The two data centers must be connected via Layer 2 links and provide the maximum throughput, redundancy, and avoid port-blocking spanning-tree design. Which deployment model meets these requirements?
A. dual-sided single vPC
B. single-sided dual vPC
C. dual-sided dual vPC
D. single-sided single vPC
Answer: C
NEW QUESTION 164
An engineer is implementing a Cisco UCS environment The requirements for the solution are for the MAC addresses to be learned only on the server-facing ports. The use of the Spanning Tree Protocol must be avoided. Also, the engineer must have deterministic traffic handling from blades to uplink ports. Which two settings must be selected to meet these requirements? (Choose two.)
A. end-host mode
B. dynamic pinning
C. NPIV mode
D. static pinning
E. switching mode
Answer: AD
NEW QUESTION 165
An engineer is building a data center network with VXLAN EVPN. The requirement is to use multicast for the broadcast, unknown unicast, and multicast replication. Which two VNI to multicast group mapping methods must be used to meet these requirements? (Choose two.)
A. many NVE to one multicast group
B. one VNI to one multicast group
C. many VNI to one multicast group
D. one NVE to many multicast groups
E. many VNI to many multicast groups
Answer: AC
NEW QUESTION 166
An engineer must design a solution based on Cisco Nexus 7709 Switches. The solution must connect test and development network segments and separate the enterprise applications from the production network. The network security team requires routing instances and the IP stack to be completely separated from each other and for traffic between the environments to undergo a deep packet inspection. The development team also requests the ability to allocate additional physical interfaces from the Cisco Nexus 7709 device in each environment. Which solution meets these requirements?
A. 1. Create a VRF for the testing and development environments.
2. Use ACLs to control traffic between the two environments.
B. 1. Enable new routing instances for the testing and development environments in the same VDC.
2. Control reachability by using firewall access policies.
C. 1. Assign a separate VDC for the testing and development environments.
2. Place a firewall between the VDCs.
D. 1. Create a separate VRF for the testing and development environments.
2. Control reachability by using firewall access policies.
Answer: C
NEW QUESTION 167
A Cisco UCS chassis with several blade servers, a pair of IOMs, and a pair of Cisco UCS Fabric Interconnects are installed in a data center. Which two high-availability architectures are recommended between the IOMs and fabric interconnects? (Choose two.)
A. One, two, four and eight links are supported to be used between each IOM and fabric interconnect.
B. IOM is connected to the fabric interconnect that is acting as fabric A, and IOM B is connected to the fabric interconnect that is acting as fabric B.
C. Any combination of one to eight links are supported to be used between each IOM and fabric interconnect.
D. The IOMs are connected with multiple straight and cross-connect links toward a pair of nonclustered fabric interconnects.
E. Straight and cross-connect links should be used between the IOMs and fabric interconnects to offer higher availability.
Answer: BC
NEW QUESTION 168
A company purchased a Cisco UCS system with four 5108 Chassis populated with UCS B-Series servers. The environment consists of nine Cisco HyperFlex rack servers. An engineer must provision virtual machines using an orchestration tool to optimize overall deployment time. Which orchestration must be used to meet this requirement?
A. Cisco Intersight
B. Cisco DNA Center
C. Cisco AppDynamic
D. Cisco Network Assurance
Answer: A
NEW QUESTION 169
A network consultant must design a high availability interconnection of a clustered Cisco UCS Fabric Interconnect toward two upstream Layer 2 switches. The Ethernet interconnection must use all redundant links and have no impact on the STP domain size. Which connectivity solution must be used?
A. Cisco UCS Fabric Interconnect in switch mode with dual uplinks distributed evenly to the upstream switches.
B. Cisco UCS Fabric Interconnect in switch mode with a single uplink toward each upstream switch to eliminate any change to the STP domain size.
C. Cisco UCS Fabric Interconnect in end host mode with a single uplink toward each upstream switch to eliminate any change to the STP domain size.
D. Cisco UCS Fabric Interconnect in end host mode with dual uplinks distributed evenly to the upstream switches.
Answer: D
NEW QUESTION 170
A network engineer must create a Fibre Channel fabric QoS design for an existing data center. The solution must provide relative bandwidth guarantees to application traffic, control latency, and prioritize application traffic. Which mechanism must be deployed to support these requirements?
A. traffic policing
B. traffic shaping
C. traffic remarking
D. traffic classification
Answer: B
NEW QUESTION 171
A customer connects a high-speed Fibre Channel storage array to a Cisco MDS 9000 Series Switch using an 8 Gbps interface. Which action guarantees line rate traffic processing on the interface?
A. Set global buffering with B2B_credits for the interface.
B. Set local buffering with B2B_credits for the interface.
C. Configure the interface rate mode as dedicated.
D. Configure the interface rate mode as shared.
Answer: C
NEW QUESTION 172
An engineer seeks a solution to retrieve routing information from Cisco Nexus switches. The data must be exported to a web application in a JSON or XML data format for monitoring and must be encrypted during transmission. The solution must not require extensive knowledge to support and should be simple to implement. Which technology accomplishes these goals?
A. Streaming Telemetry
B. Cisco Tetration
C. NX-API
D. Python Scripts
Answer: A
NEW QUESTION 173
……
New 2020 CCNP 300-610 DCID exam questions from PassLeader 300-610 dumps! Welcome to download the newest PassLeader 300-610 VCE and PDF dumps: https://www.passleader.com/300-610.html (173 Q&As –> 260 Q&As)
P.S. Free 2020 CCNP 300-610 DCID dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=1c_jCRX5tmsM6Qv8wc94o-MtnPkY936As