New 2020 CCNP 300-410 ENARSI exam questions from PassLeader 300-410 dumps! Welcome to download the newest PassLeader 300-410 VCE and PDF dumps: https://www.passleader.com/300-410.html (308 Q&As –> 350 Q&As –> 406 Q&As –> 689 Q&As –> 740 Q&As) [Lab Simulations Available]
P.S. Free 2020 CCNP 300-410 ENARSI dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=1AR525EpkM4rOj60-INeVcfoGkNJfT8PY
NEW QUESTION 295
What does the MP-BGP OPEN message contain?
A. MPLS labels and the IP address of the router that receives the message.
B. the version number and the AS number to which the router belongs.
C. IP routing information and the AS number to which the router belongs.
D. NLRI, path attributes, and IP addresses of the sending and receiving routers.
Answer: B
NEW QUESTION 296
What are the two prerequisites to enable BFD on Cisco routers? (Choose two.)
A. A supported IP routing protocol must be configured on the participating routers.
B. OSPF Demand Circuit must run BFD on all participating routers.
C. ICMP must be allowed on all participating routers.
D. UDP port 1985 must be allowed on all participating routers.
E. Cisco Express Forwarding and IP Routing must be enabled on all participating routers.
Answer: CE
NEW QUESTION 297
Refer to the exhibit:
R5 should not receive any routes originated in the EIGRP domain. Which set of configuration changes removes the EIGRP routes from the R5 routing table to fix the issue?
A. R4
route-map O2R deny 10
match tag 111
route-map O2R permit 20
!
router rip
redistribute ospf 1 route-map O2R metric 1
B. R2
route-map E20 deny 20
R4
route-map O2R deny 10
match tag 111
!
router rip
redistribute ospf 1 route-map O2R metric 1
C. R4
route-map O2R permit 10
match tag 111
route-map O2R deny 20
!
router rip
redistribute ospf 1 route-map O2R metric 1
D. R4
route-map O2R deny 10
match tag 111
!
router rip
redistribute ospf 1 route-map O2R metric 1
Answer: A
NEW QUESTION 298
Refer to the exhibit:
An engineer has configured R1 as EIGRP stub router. After the configuration, router R3 failed to reach to R2 loopback address. Which action advertises R2 loopback back into the R3 routing table?
A. Add a static route for R2 loopback address in R1 and redistribute it to advertise to R3.
B. Use a leak map on R1 that matches the required prefix and apply it with the distribute list command toward R3.
C. Use a leak map on R3 that matches the required prefix and apply it with the EIGRP stub feature.
D. Add a static null route for R2 loopback address in R1 and redistribute it to advertise to R3.
Answer: A
NEW QUESTION 299
Refer to the exhibit:
An engineer configures the router 10.1.100.10 for EIGRP autosummarization so that R1 should receive the summary route of 10.0.0.0/8. However, R1 receives more specific /24 routes. Which action resolves this issue?
A. Router R1 should configure ip summary address eigrp (AS number) 10.0.0.0 255.0.0.0 for the R1 Fast Ethernet 0/0 connected interface.
B. Router R1 should configure ip route 10.0.0.0 255.0.0.0 null 0 for the routes that are received on R1.
C. Router 10.1.100.10 should configure ip route 10.0.0.0 255.0.0.0 null 0 for the routes that are summarized toward R1.
D. Router 10.1.100.10 should configure ip summary address eigrp (AS number) 10.0.0.0 255.0.0.0 for the R1 Fast Ethernet 0/0 connected interface.
Answer: D
NEW QUESTION 300
Refer to the exhibit:
An engineer is troubleshooting a TACACS problem. Which action resolves the issue?
A. Configure a matching TACACS server IP.
B. Configure a matching preshared key.
C. Generate authentication from a relative source interface.
D. Apply a configured AAA profile to the VTY.
Answer: B
NEW QUESTION 301
The network administrator configured CoPP so that all HTTP and HTTPS traffic from the administrator device located at 172.16 1.99 toward the router CPU is limited to 500 kbps. Any traffic that exceeds this limit must be dropped.
access-list 100 permit ip host 172.16.1.99 any
!
class-map CM-ADMIN
match access-group 100
!
policy-map PM-COPP
class CM-ADMIN
police 500000 conform-action transmit
!
interface E0/0
service-policy input PM-COPP
CoPP failed to capture the desired traffic and the CPU load is getting higher. Which two configurations resolve the issue? (Choose two.)
A. interface E0/0
no service-policy input PM-COPP
!
control-plane
service-policy input PM-COPP
B. policy-map PM-COPP
class CM-ADMIN
no police 500000 conform-action transmit
police 500 conform-action transmit
!
control-plane
service-policy input PM-COPP
C. no access-list 100
access-list 100 permit tcp host 172.16.1.99 any eq 80
D. no access-list 100
access-list 100 permit tcp host 172.16.1.99 any eq 80
access-list 100 permit tcp host 172.16.1.99 any eq 443
E. policy-map PM-COPP
class CM-ADMIN
no police 500000 conform-action transmit
police 500 conform-action transmit
Answer: A
NEW QUESTION 302
Refer to the exhibit:
While monitoring VTY access to a router, an engineer notices that the router does not have any filter and anyone can access the router with username and password even though an ACL is configured. Which command resolves this issue?
A. access-class INTERNET in
B. ip access-group INTERNET in
C. ipv6 traffic-filter INTERNET in
D. ipv6 access-class INTERNET in
Answer: D
NEW QUESTION 303
Refer to the exhibit:
A network administrator is troubleshooting IPv6 address assignment for a DHCP client that is not getting an IPv6 address from the server. Which configuration retrieves the client IPv6 address from the DHCP server?
A. ipv6 address autoconfig command on the interface
B. ipv6 dhcp server automatic command on DHCP server
C. ipv6 dhcp relay-agent command on the interface
D. service dhcp command on DHCP server
Answer: A
NEW QUESTION 304
Refer to the exhibit:
A junior engineer configured SNMP to network devices. Malicious users have uploaded different configurations to the network devices using SNMP and TFTP servers. Which configuration prevents changes from unauthorized NMS and TFTP servers?
A. access-list 20 permit 10.221.10.11
access-list 20 deny any log
!
snmp-server group NETVIEW v3 priv read NETVIEW access 20
snmp-server group NETADMIN v3 priv read NETVIEW write NETADMIN access 20
snmp-server community Cisc0Us3r RO 20
snmp-server community Cisc0wrus3r RW 20
snmp-server tftp-server-list 20
B. access-list 20 permit 10.221.10.11
access-list 20 deny any log
!
snmp-server group NETVIEW v3 priv read NETVIEW access 20
snmp-server group NETADMIN v3 priv read NETVIEW write NETADMIN access 20
snmp-server community Cisc0wrus3r RO 20
snmp-server community Cisc0Us3r RW 20
snmp-server tftp-server-list 20
C. access-list 20 permit 10.221.10.11
access-list 20 deny any log
D. access-list 20 permit 10.221.10.11
Answer: A
NEW QUESTION 305
Refer to the exhibit:
Although summarization is configured for R1 to receive 10.0.0.0/8. more specific routes are received by R1. How should the 10.0.0.0/8 summary route be received from the neighbor, attached to R1 via Fast Ethernet0/0 interface?
A. R1 should configure the ip summary-address eigrp <AS number> 10.0.0.0.255.0.0.0 command under the Fast Ethernet 0/0 interface.
B. The summarization condition is not met Router 10 1 100.10 requires a route for 10 0.0.0/8 that points to null 0.
C. The summarization condition is not met. The network 10.1.100.0/24 should be changed to 172.16.0.0/24.
D. R1 should configure the ip summary-address eigrp <AS number> 10.0.0.0 0.0.0.255 command under the Fast Ethernet 0/0 interface.
Answer: D
NEW QUESTION 306
Refer to the exhibit:
A prefix list is created to filter routes inbound to an EIGRP process except for network 10 prefixes After the prefix list is applied no network 10 prefixes are visible in the routing table from EIGRP. Which configuration resolves the issue?
A. ip prefix-list EIGRP seq 20 permit 10.0.0.0/8 ge 9
B. ip prefix-list EIGRP seq 10 permit 0.0.0.0/0 le 32
C. ip prefix-list EIGRP seq 5 permit 10.0.0.0/8 ge 9 no ip prefix-list EIGRP seq 20 permit 10.0.0.0/8
D. ip prefix-list EIGRP seq 20 permit 10.0.0.0/8 ge 9 ip prefix-list EIGRP seq 10 permit 0.0.0.0/0 le 32
Answer: B
NEW QUESTION 307
Drag and Drop
Drag and drop the IPv6 first hop security device roles from the left onto the corresponding descriptions on the right.
Answer:
NEW QUESTION 308
……
New 2020 CCNP 300-410 ENARSI exam questions from PassLeader 300-410 dumps! Welcome to download the newest PassLeader 300-410 VCE and PDF dumps: https://www.passleader.com/300-410.html (308 Q&As –> 350 Q&As –> 406 Q&As –> 689 Q&As –> 740 Q&As) [Lab Simulations Available]
P.S. Free 2020 CCNP 300-410 ENARSI dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=1AR525EpkM4rOj60-INeVcfoGkNJfT8PY
