New 2020 CCIE/CCNP 350-501 SPCOR exam questions from PassLeader 350-501 dumps! Welcome to download the newest PassLeader 350-501 VCE and PDF dumps: https://www.passleader.com/350-501.html (466 Q&As) [Lab Simulations Available]
P.S. Free 2020 CCIE/CCNP 350-501 SPCOR dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=1Mposo1mfECAFRL11-QuNZJ05dC0ab_b8
NEW QUESTION 426
What is the purpose of RSVP tear messages?
A. to inform the headend router of LSP issues
B. to confirm successful end-to-end resource allocation
C. to reuse router resources for other reservation requests
D. to notify the tail-end router of resource unavailability on the transit router
Answer: C
NEW QUESTION 427
An engineer working for a telecommunication company with an employee ID: 1234:56:789 must configure an OSPF router in a multivendor network so that it performs NSF in the event of a route processor switchover. Which configuration must the engineer apply?
A. router ospf 1
nsf cisco
B. router ospf 1
nsf cisco helper
C. router ospf 1
nsf ietf helper
D. router ospf 1
nsf ietf
Answer: D
NEW QUESTION 428
Which core component of MDT describes the data that an MDT-capable device streams to a collector?
A. sensor path
B. encoder
C. transport protocol
D. subscription
Answer: A
NEW QUESTION 429
How is RSVP used with MPLS traffic engineering tunnels?
A. It assigns a tag to a packet as it travels through the tunnel.
B. It removes and reassigns an MPLS label when the packet enters the tunnel.
C. It reserves bandwidth along the path of the tunnel.
D. It reduces the CPU burden when a packet travels through the tunnel.
Answer: C
NEW QUESTION 430
A network architect must implement CSC VPN services for a new backbone earner. Which two benefits does the architecture provide? (Choose two.)
A. It leverages IPsec to establish connections within the backbone, which eliminates the need for BGP to distribute routes.
B. It supports a scalable growth strategy that services multiple customers efficiently.
C. It relies on IP communications, which simplifies the network design.
D. It eliminates the need to maintain a centralized network-maintenance and operations strategy.
E. It maintains a single backbone, which simplifies the VPN implementation to customers.
Answer: BE
NEW QUESTION 431
Refer to the exhibit:
Router 1 and Router 2 were installed in the data center Router 1 is the core router in the network, but it fails to establish an OSPF peering with Router 2, and customer traffic is unable to pass. Router 1 also reports an increase in CPU and memory usage. However, the CPU for R2 is stable. Which action resolves this issue?
A. Change the MTU to 1524 on Router 1.
B. Disable Cisco Express Forwarding on Router 2.
C. Change the transport mode to WAN on Rooter 1.
D. Enable MPLS on Router 2.
Answer: A
NEW QUESTION 432
Refer to the exhibit:
A global company plans to implement BGP at its newest location to provide connectivity to other offices. The global infrastructure of the company is a multivendor environment. An engineer must review the BGP core configurations at headquarters to determine if they can be repurposed at the new location. The engineer copied this JSON script for review. What is the effect of the script?
A. It configures BGP on the device and inserts 192.168.1.0/24 into the BGP table using the origin AS 65514.
B. It configures a VRF named cisconode1 and a BGP instance using the VPNv4 address family.
C. It configures BGP with neighbor 192.168.1.2 residing in AS 65514.
D. It sets the BGP router-ID to 192.168.1.2 and sets the AS of the router to 65514.
Answer: C
NEW QUESTION 433
Refer to the exhibit:
A host connected to R3 must connect with a server on R1 that provides critical, time-sensitive data. Traffic between the host and server must always be given bandwidth to traverse the links when they are congested, with other traffic being dropped. How must the network engineer implement a QoS strategy with classification to ensure that the traffic is given the appropriate bandwidth?
A. Implement policing to rate-limit noncritical traffic that exceeds designated thresholds.
B. Implement traffic shaping to delay noncritical traffic when the link is congested.
C. Implement strict priority to guarantee bandwidth for the server traffic.
D. Implement FIFO to guarantee that the server traffic is sent first while other traffic is queued.
Answer: C
NEW QUESTION 434
Refer to the exhibit:
Over the last few months, ISP A has doubled its user base. The IT Director asked the engineering team to monitor memory consumption and buffer statistics on all P and PE devices in the MPLS core. Most devices have CPU usage of 70% or more, so the solution must be targeted and secure. Which two commands must the engineering team implement on P and PE devices to meet these requirements? (Choose two.)
A. snmp-server enable traps memory bufferpeak
B. snmp-server host 192.168.101.1 version 1 community1 auth memory
C. snmp-server enable snmp-traps community1 bufferpeak
D. snmp-server host 192.168.101.1 version 2c community1 memory
E. snmp-server host 192.168.101.1 version 3 auth community1 memory
Answer: AB
NEW QUESTION 435
Refer to the exhibit:
An engineer must implement a traceroute operation to verify the R1 point-to-multipoint LSP connections. The traceroute operation must return all labels and hop-by-hop IP addresses for destinations 10.20.0.1, 10.30.0.1, and 10.40.0.1, and the maximum number of hops is 4. Which command must be executed to meet the requirements?
A. traceroute mpls ipv4 10.30.0.1/32 fec-type generic
B. traceroute mpls ipv4 10.20.0.1/32 ttl 4
C. traceroute mpls traffic-eng tunnel-mte 10 ttl 4
D. traceroute mpls traffic-eng tunnel-mte 10 responder-id 10.40.0.1
Answer: C
NEW QUESTION 436
Refer to the exhibit:
The operations team for a service provider network is implementing a route map policy. OSPF area 0 should originate the default route with a type 2 metric of 2 when the application server on the connected interface (192.168.1.1) is up. Routers RL and RM have set up OSPF peering with other adjacent routers. Which action meets this requirement?
A. Apply default-information originate route-map ospf-default-route on router RL.
B. Apply default-information originate route-map ospf-default-route on router RM.
C. Configure distribute-list route-map ospf-default-route out on router RM.
D. Configure distribute-list route-map ospf-default-route out on router RL.
Answer: A
NEW QUESTION 437
Refer to the exhibit:
To optimize network operations, the senior architect created this Python 3.9 script for network automation tasks and to leverage Ansible 4.0 playbooks. Devices in the network support only RFC 2617-based authentication. What does the script do?
A. The script performs a configuration sanity check on the device with IP address 172.168.211.65 via HTTP and returns an alert if the payload field fails to match.
B. The script leverages REST API calls and configures interface GigabitEthernet0/1 with IP address 10.1.131.112/30.
C. The script parses the JSON response from the router at IP address 172.168 211.65 and checks if the interface GigabitEthernet0/1 with IP address 10.1.131.112 exists on the router.
D. The script logs in via SSH and configures interface GigabitEthernet0/1 with IP address 10 1.131.112/30.
Answer: B
NEW QUESTION 438
Refer to the exhibit:
The ISP is implementing a new hosting-as-a-service solution for its business customers. Service accessibility must be unique and separate for each customer. The network architect must ensure that multiple paths toward the hosting-as-a-service solution are always available. Basic protection against traffic black-holing on the MPLS network is required in case of link failure. Which two actions must the engineering team perform to meet the requirements? (Choose two.)
A. Configure the fast-hello command under the IS-IS routing protocol with the BGP multipath 2 option enabled.
B. Enable the VRF-Lite feature on router R4 and enable BGP address-family VPNv4.
C. Create the hosting-as-a-service VRF on router R4 and configure it with the route target both 65123:88 command.
D. Configure the fast-reroute per-prefix command for the IS-IS protocol in the MPLS network and enable the BGP route-reflector feature on R2.
E. Configure the mpls ldp sync command in the MPLS network with the BGP additional-paths receive and additional-paths send options.
Answer: CE
NEW QUESTION 439
Refer to the exhibit:
Which part of the diagram will host OpenStack components?
A. UCS Series
B. Aggregation
C. Access
D. Core
Answer: A
NEW QUESTION 440
Refer to the exhibit:
A client wants to filter routes to a BGP peer to limit access to restricted areas within the network. The engineer configures the route map ciscotest to filter routes from the BGP neighbor. The engineer also sets a tag that will be used for QoS in the future. Which task must be performed to complete the implementation?
A. Create a route map, configure BGP with an IPv4 address family, and activate the neighbor.
B. Attach the new route map to the BGP neighbor statement in the inbound direction.
C. Create a policy map named ciscotest and apply it to inbound traffic on the link that is directly connected to the BGP neighbor.
D. Add a route map statement with sequence 40 that links a BGP community to the routing protocol.
Answer: B
NEW QUESTION 441
Refer to the exhibit:
Tier 1 ISP A purchased several Tier 2 ISPs to increase their customer base and provide more regional coverage. ISP A plans to implement MPLS services in the access layer, with scalability up to 100,000 devices in one packet network and service recovery up to 50 ms. The network architect decided to use different independent IGP and LDP domains and interconnect LSPs that are based on RFC 3107. Which two actions must the network engineer perform to meet the requirements? (Choose two.)
A. Implement BGP inline RR functionality with next-hop-self capabilities on routers R2 and R3.
B. Implement the IS-IS routing protocol on the access domain.
C. Implement BGP connectivity between routers R1 and R4 with VPNv4 address family enabled.
D. Configure three OSPF areas, with Area 0 in the core domain, and Areas 2 and 3 in the aggregation domain.
E. Implement BGP PIC core functionality on routers R2 and R3.
Answer: AE
NEW QUESTION 442
Refer to the exhibit:
Tier 1 ISP A is connected to small Tier 3 ISP B. The EBGP routing protocol is used for route exchange. The networking team at ISP A noticed the flapping of BGP sessions with ISP B. The team decides to improve stability on the network by suppressing the subnet for 30 minutes when a session begins to flap. Which action must the team perform to meet this goal?
A. Implement BGP route dampening on ISP A router R1 with the bgp dampening 15 700 1500 30 command.
B. Implement a BGP route withdraw-delay timer on ISP B router R3 with the bgp withdraw-delay 30 15 90 30 command.
C. Implement a BGP route-penalty timer on ISP A router R1 with the bgp penalty-timer 30 250 750 15 command.
D. Implement BGP route suppression on ISP A router R2 with the bgp suppression 30 600 1200 30 command.
Answer: A
NEW QUESTION 443
Refer to the exhibit:
Routers R1 through R5 are being deployed within the core of a service provider running BGP. The core supports distribution of VPNv4 routes using MPLS. R3 currently has multiple paths to reach R4. A network engineer must implement BGP attributes so that R3 can reach R4 via R1. Which action must the engineer take to meet the requirement?
A. Configure R3 so the route to R4 through R1 will have a higher weight than the route from R2 or R5.
B. Configure R2 to send the route from R4 to R1 using a higher metric than what is advertised to R3.
C. Configure R3 so the route to R4 through R1 will have a lower local preference than the route from R2 or R5.
D. Configure R5 to send the route from R4 to R1 using a longer AS path than the AS path that it receives from R1 or R2.
Answer: A
NEW QUESTION 444
……
New 2020 CCIE/CCNP 350-501 SPCOR exam questions from PassLeader 350-501 dumps! Welcome to download the newest PassLeader 350-501 VCE and PDF dumps: https://www.passleader.com/350-501.html (466 Q&As) [Lab Simulations Available]
P.S. Free 2020 CCIE/CCNP 350-501 SPCOR dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=1Mposo1mfECAFRL11-QuNZJ05dC0ab_b8
