New 2020 CCNP 300-610 DCID exam questions from PassLeader 300-610 dumps! Welcome to download the newest PassLeader 300-610 VCE and PDF dumps: https://www.passleader.com/300-610.html (156 Q&As –> 173 Q&As –> 260 Q&As)
P.S. Free 2020 CCNP 300-610 DCID dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=1c_jCRX5tmsM6Qv8wc94o-MtnPkY936As
NEW QUESTION 141
A network architect designs the iSCSI-based storage area network solution. The iSCSI datastore must be designed with high availability, minimal downtime, and no single point of failure. The requirement is to fail over I/O to alternate paths based on SCSI sense codes without reliance on network failures. Which feature must be deployed to meet these requirements?
A. hardware-based flow control
B. port security
C. iSCSI multipath
D. NIC teaming
Answer: C
NEW QUESTION 142
A network consultant reviews the requirements for the Storage Area Network (SAN) design. The proposed solution must offer a very efficient port usage and eliminate the need for a separate physical layer of switches and their associated ISLs. The design is not expected to require future expansion. Which SAN topology must be used to meet these requirements?
A. core-edge
B. collapsed-core
C. core-distribution-access
D. edge-core-edge
Answer: B
NEW QUESTION 143
A storage administrator receives reports of network delays when database software attempts to access the storage array. The virtual machines that host the database software are installed on different rack servers connected to the Cisco UCS Fabric Interconnect domain. The existing SAN switches are connected to the Fabric Interconnects using two 8 Gb port-channel interfaces to connect the storage array. The storage administrator has decided to deploy iSCSI storage with four 10 Gbps interfaces connected to the Cisco UCS Fabric Interconnects. Which deployment type resolves the problems with storage contention?
A. iSCSI storage with Cisco UCS Fabric Interconnect in the virtual port-channel mode
B. iSCSI storage with Cisco UCS Fabric Interconnect using an appliance port
C. iSCSI storage appliance on Cisco UCS Fabric Interconnect uplink trunk port
D. iSCSI storage appliance on Cisco UCS Fabric Interconnect in the storage end-host mode
Answer: C
NEW QUESTION 144
An end user is experiencing network latency when accessing a database in a disaster recovery site. The monitoring team concluded that the database was writing simultaneously to the storage arrays on the primary and disaster recovery sites. Which design resolves this issue?
A. asynchronous replication between data centers
B. synchronous replication between data centers
C. FCoE tunnel between data center
D. FCIP tunneling between data center
Answer: A
NEW QUESTION 145
An engineer must choose the World Wide Port Name for the Cisco UCS Fibre Channel virtual host bus adapter. Which identifier must be used?
A. naa.600a09840691712159764d
B. fe80::314e:4566:8702:bf3d
C. iqn.2021-08.com.acme:3xxx
D. 20:00:00:25:B5:97:c3:ac
Answer: D
NEW QUESTION 146
An engineer must implement an iSCSI storage connectivity in the existing Cisco UCS environment. The environment is based on Cisco UCS С-Series rack server, Cisco Nexus 1000V Series Switches, and VMware ESXi hosts. The implementation must meet these requirements:
– Provide multipathing and high availability in the event of a critical path failure.
– Be cost-effective and not require the purchase of new equipment.
Which two components must be selected to meet these requirements? (Choose two.)
A. software iSCSI adapter
B. storage binding
C. uplink pinning
D. system VLAN
E. hardware iSCSI NIC
Answer: AB
NEW QUESTION 147
An engineer develops a framework for automatic repetitive tasks needed to manage a Cisco Nexus 9000 Series Switch. The engineer plans to use a programmatic interface and must keep these considerations in mind:
– The customer’s environment requires the script to authenticate before executing further actions.
– The customer’s security requirements mandate the use of HTTP transport.
– The automation team is familiar with parsing messages encoded in XML or JSON format.
Which solution meets these requirements?
A. SNMPv3
B. gRPC
C. RESTCONF
D. NX-API
Answer: D
NEW QUESTION 148
An engineer deploys VMware ESXi hypervisor on blade servers. The virtual networking is managed by Cisco Nexus 1000V Series Switches. Which configuration aligns with Cisco recommended practices for providing high availability and a maximum throughput to the VMware ESXi hosts?
A. dual vNICs with static EtherChannel link aggregation
B. dual vNICs with hardware fabric failover on the fabric interconnects
C. dual vNICs with MAC pinning link aggregation
D. dual vNICs with LACP link aggregation
Answer: D
NEW QUESTION 149
An engineer is operating data center environment that hosts data-intensive financial applications. The applications are mostly processing HTTP/HTTPS data with large data segments, which results in a CPU contention due to the significant network processing. Which set of the Ethernet adapter policies must be selected to resolve the issue?
A. – Receive Checksum Offload field set to Disabled
– TCP Segmentation Offload field set to Disabled
– Transmit Queues field: 32
– Ring Size field: 256
B. – Receive Checksum Offload field set to Enabled
– TCP Segmentation Offload field set to Disabled
– Transmit Queues field: 64
– Ring Size field: 128
C. – Receive Checksum Offload field set to Enabled
– TCP Segmentation Offload field set to Enabled
– Transmit Queues field: 128
– Ring Size field: 64
D. – Receive Checksum Offload field set to Disabled
– TCP Segmentation Offload field set to Enabled
– Transmit Queues field: 256
– Ring Size field: 128
Answer: B
NEW QUESTION 150
An engineer must deploy a Cisco HyperFlex system at two data centers. For redundancy reasons, the setup must achieve data protection in case of an entire site failure. The data must be available on both sites at all times to keep the recovery time objective to a minimum. Which Cisco HyperFlex deployment model meets these requirements?
A. ROBO cluster
B. stretched cluster
C. edge with four nodes or more
D. standard with eight nodes
Answer: B
NEW QUESTION 151
A network consultant proposes that the configuration of the Cisco UCS servers be based on service templates to facilitate the UCS infrastructure operation. The service profiles must remain connected to the template and be modified when the template settings are changed. Which configuration meets these requirements?
A. service profile with type set to Global
B. service profile with type set to Local
C. service profile template with type set to Updating
D. service profile template with type set to Initial
Answer: C
NEW QUESTION 152
An engineer must integrate Layer 4 to Layer 7 services within Cisco ACI Fabric. The main requirement is to have a single point of configuration for network elements and firewall policies. Which action meets these requirements?
A. Define the service graph model as network policy mode.
B. Deploy the firewalls in routed mode with PBR.
C. Deploy the firewalls in transparent mode.
D. Define the service graph model as service policy mode.
Answer: D
NEW QUESTION 153
A cloud provider deploys an infrastructure based on Cisco ACI Fabric, Cisco UCS, and Cisco HyperFlex Data Platform. The storage area network will be based on Cisco MDS 9000 Series Switches with Hyper-V, VMware, and KVM used as the virtualization platform. The requirement is to deploy the overall solution by using a robust automation and orchestration tool. Which tool meets these requirements?
A. Cisco Prime Infrastructure
B. Cisco Network Assurance
C. Cisco UCS Director
D. Cisco Cloud Center
Answer: C
NEW QUESTION 154
……
New 2020 CCNP 300-610 DCID exam questions from PassLeader 300-610 dumps! Welcome to download the newest PassLeader 300-610 VCE and PDF dumps: https://www.passleader.com/300-610.html (156 Q&As –> 173 Q&As –> 260 Q&As)
P.S. Free 2020 CCNP 300-610 DCID dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=1c_jCRX5tmsM6Qv8wc94o-MtnPkY936As
