New 2022 CCDE 400-007 exam questions from PassLeader 400-007 dumps! Welcome to download the newest PassLeader 400-007 VCE and PDF dumps: https://www.passleader.com/400-007.html (292 Q&As –> 360 Q&As)
P.S. Free 2022 CCDE 400-007 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/drive/folders/1L7c-Dlc_ic26sbAWy0XY8x32iwDfuPsC
NEW QUESTION 156
Which three tools are used for ongoing monitoring and maintenance of a voice and video environment? (Choose three.)
A. flow-based analysis to measure bandwidth mix of applications and their flows
B. call management analysis to identify network convergence-related failures
C. call management analysis to identify CAC failures and call quality issues
D. active monitoring via synthetic probes to measure loss, latency, and jitter
E. passive monitoring via synthetic probes to measure loss, latency, and jitter
F. flow-based analysis with PTP time-stamping to measure loss, latency, and jitter
Answer: ACD
NEW QUESTION 157
Which MPLS TE design consideration is true?
A. MPLS TE replaces LDP and the dependency of the IGP to identify the best path.
B. MPLS TE provides link and node protection.
C. MPLS TE optimizes the routing of IP traffic, given the constraints imposed by backbone capacity and application requirements.
D. MPLS TE requires Layer 3 VPN full-mesh topology deployment.
Answer: C
NEW QUESTION 158
You have been asked to design a high-density wireless network for a university campus. Which two principles would you apply in order to maximize the wireless network capacity? (Choose two.)
A. Implement a four-channel design on 2.4 GHz to increase the number of available channels.
B. Choose a high minimum data rate to reduce the duty cycle.
C. Increases the number of SSlDs to load-balance the client traffic.
D. Make use of the 5-GHz band to reduce the spectrum utilization on 2.4 GHz when dual-band clients are used.
E. Enable 802.11n channel bonding on both 2.4 GHz and 5 GHz to increase the maximum aggregated cell throughput.
Answer: BD
NEW QUESTION 159
Which two technologies enable multilayer segmentation? (Choose two.)
A. policy-based routing
B. segment routing
C. data plane markings
D. firewalls
E. filter lists
Answer: AD
NEW QUESTION 160
You have been tasked with designing a data center interconnect as part of business continuity. You want to use FCoE over this DCI to support synchronous replication. Which two technologies allow for FCoE via lossless Ethernet or data center bridging? (Choose two.)
A. DWDM
B. EoMPLS
C. SONET/SDH
D. Multichassis EtherChannel over Pseudowire
E. VPLS
Answer: AC
NEW QUESTION 161
How must the queue sizes be designed to ensure that an application functions correctly?
A. Each individual device queuing delay in the chain must be less than or equal to the application required delay.
B. The queuing delay on every device in the chain must be exactly the same to the application required delay.
C. The default queue sizes are good for any deployment as it compensates the serialization delay.
D. The sum of the queuing delay of all devices plus serialization delay in the chain must be less than or equal to the application required delay.
Answer: D
NEW QUESTION 162
Which two actions ensure voice quality in a branch location with a low-speed, high-latency WAN connection? (Choose two.)
A. Increase WAN bandwidth.
B. Increase memory branch switch.
C. Fragment data packets.
D. Replace any electrical links with optical links.
E. Prioritize voice packets.
Answer: CE
NEW QUESTION 163
Which management category is not part of FCAPS framework?
A. Configuration
B. Security
C. Performance
D. Authentication
E. Fault-management
Answer: D
NEW QUESTION 164
What is a characteristic of a secure cloud architecture model?
A. limited access to job function
B. dedicated and restricted workstations
C. multi-factor authentication
D. software-defined network segmentation
Answer: D
NEW QUESTION 165
Which best practice ensures data security in the private cloud?
A. Use IPsec for communication between unsecured network connection.
B. Encrypt data at rest and in transition.
C. Use the same vendor for consistent encryption.
D. Anonymize data ownership to comply with privacy rules.
Answer: B
NEW QUESTION 166
What are two examples of business goals to be considered when a network design is built? (Choose two.)
A. standardize resiliency
B. minimize operational costs
C. integrate endpoint posture
D. ensure faster obsolescence
E. reduce complexity
Answer: BE
NEW QUESTION 167
Which three items do you recommend for control plane hardening of an infrastructure device? (Choose three.)
A. redundant AAA servers
B. Control Plane Policing
C. warning banners
D. to enable unused .services
E. SNMPv3
F. routing protocol authentication
Answer: BEF
NEW QUESTION 168
Which network management framework can be used to develop a network architecture that contains business requirements analysis, gap analysis, and network diagrams as artifacts to be used for design and implementation later?
A. TOG
B. ITIL
C. FCAPS
D. Cobit
Answer: C
NEW QUESTION 169
What are two common approaches to analyzing and designing networks? (Choose two.)
A. bottom-up approach
B. high-low security approach
C. top-down approach
D. left-right approach
E. three-tier approach
Answer: AC
NEW QUESTION 170
How can EIGRP topologies be designed to converge as fast as possible in the event of a point-to-point link failure?
A. Limit the query domain by use of distribute lists.
B. Build neighbor adjacencies in a triangulated fashion.
C. Build neighbor adjacencies in squared fashion.
D. Limit the query domain by use of summarization.
E. Limit the query domain by use of default routes.
Answer: D
NEW QUESTION 171
Which relationship between IBGP and the underlying physical topology is true?
A. iBGP full mesh requirement does not dictate any specific network topology.
B. iBGP can worn only on a ring network topology with a link-state protocol like OSPF or IS-IS.
C. iBGP full mesh requires an underlying fully meshed network topology.
D. iBGP does not work on a ring network topology even with an underlying IGP.
Answer: A
NEW QUESTION 172
Which two statements describe the hierarchical LAN design model? (Choose two.)
A. It is a well-understood architecture that provides scalability.
B. It is the best design for modern data centers.
C. It is the most optimal design but is highly complex.
D. It provides a simplified design.
E. Changes, upgrades, and new services can be introduced in a controlled and stagged manner.
Answer: AE
NEW QUESTION 173
Which two points must network designers consider when designing a new network design or when evaluating an existing network design to help them understand the high-level design direction with regards to the security aspects? (Choose two.)
A. Consider Business objectives and goals.
B. Consider organization’s security policy standards.
C. Consider for only multi-site networks.
D. Consider for only new network technologies and components.
Answer: AB
NEW QUESTION 174
A healthcare customer requested that SNMP traps must be sent over the MPLS Layer 3 VPN service. Which protocol must be enabled?
A. SNMPv3
B. Syslog
C. Syslog TLS
D. SNMPv2
E. SSH
Answer: A
NEW QUESTION 175
Which architecture does not require an explicit multicast signaling protocol, such as PIM or P2MP, to signal the multicast state hop-by-hop, but instead uses a link state protocol to advertise the multicast forwarding state?
A. Binary indexed explicit routing.
B. Binary intermediate enhanced routing.
C. Bit indexed explicit replication.
D. Bi-directional implicit replication.
Answer: C
NEW QUESTION 176
……
New 2022 CCDE 400-007 exam questions from PassLeader 400-007 dumps! Welcome to download the newest PassLeader 400-007 VCE and PDF dumps: https://www.passleader.com/400-007.html (292 Q&As –> 360 Q&As)
P.S. Free 2022 CCDE 400-007 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/drive/folders/1L7c-Dlc_ic26sbAWy0XY8x32iwDfuPsC
