New 2020 CCIE/CCNP 350-401 ENCOR exam questions from PassLeader 350-401 dumps! Welcome to download the newest PassLeader 350-401 VCE and PDF dumps: https://www.passleader.com/350-401.html (1198 Q&As –> 1239 Q&As) [Lab Simulations Available]
P.S. Free 2020 CCIE/CCNP 350-401 ENCOR dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=1nv6C6Az-yuR5kOXg8FV3gytDer_usQBX
NEW QUESTION 1170
Which type of roaming event occurs when a client roams across multiple mobility groups?
A. Layer1
B. Layer7
C. Layer3
D. Layer2
Answer: C
NEW QUESTION 1171
A Cisco administrstor deploys a new wireless network but CAPWAP APs cannot communicate with the wireless controller. IP connectivity in the network functions properly. Which action resolves the issue?
A. Open CAPWAP UDP port 12222 in the network firewall.
B. Open CAPWAP UDP ports 5246 and 5247 in the network firewall.
C. Enable the UDP Lite feature on the WLC.
D. Ensure that the controller is connected to a AAA server.
Answer: B
NEW QUESTION 1172
Which technique is used to protect end user devices and data from unknown file behavior?
A. crypto file ransomware protection using a file hash calculation
B. file retrospection using continuous scan and analyses
C. file sandboxing using a protected environment to analyze and simulate the behavior of unknown files
D. phishing file quarantine using an internal environment to store attached files
Answer: C
NEW QUESTION 1173
A client requests a wireless solution for remote branch offices to eliminate the need for a local controller at each branch. The branch users require local termination in a specifc VLAN for local internet breakout. Which solution must be deployed?
A. central switched
B. FlexConnect local switching
C. auto-anchor mobility
D. asymmetric tunneling
Answer: B
NEW QUESTION 1174
Which type of tunnel is required between two WLCs to enable intercontroller roaming?
A. CAPWAP
B. LWAPP
C. mobility
D. IPsec
Answer: A
NEW QUESTION 1175
Which device, in a LISP router architecture, receives LISP map requests and determines which ETR should handle the map request?
A. proxy ETR
B. routing locator
C. map resolver
D. map server
Answer: C
NEW QUESTION 1176
How does a WLC achieve stateful switchover for APs and clients?
A. The active WLC establishes a CAPWAP tunnel to the AP, and the standby WLC establishes a LWAPP tunnel to the AP.
B. The active WLC establishes a CAPWAP tunnel with the AP, and the standby WLC copies the AP database and the client database from the active WLC.
C. The active WLC establishes a CAPWAP tunnel with the AP and standby WLC to share the AP database information.
D. The active and standby WLCs establish separate CAPWAP tunnels to the AP.
Answer: B
NEW QUESTION 1177
What is a consideration when designing a Cisco SD-Access underlay network?
A. It must support IPv4 and IPv6 underlay networks.
B. End user subnets and endpoints are part of the underlay network.
C. Static routing is a requirement.
D. The underlay switches provide endpoint physical connectivity for users.
Answer: D
NEW QUESTION 1178
Which mechanism can be used to enforce network access authentication against an AAA server if the endpoint does not support the 802.1X supplicant functionality?
A. MAC Authentication Bypass
B. MACsec
C. private VLANs
D. port security
Answer: A
NEW QUESTION 1179
Which NTP concept is used to measure the distance from a device to its authoritative time source?
A. stratum
B. NTP peer
C. GPS
D. atomic clock
Answer: A
NEW QUESTION 1180
In a Cisco SD-Access environment, which function is performed by the border node?
A. Connect users and devices to the fabric domain.
B. Group endpoints into IP pools.
C. Provide reachability information to fabric endpoints.
D. Provide connectivity to traditional Layer 3 networks.
Answer: D
NEW QUESTION 1181
What is a characteristic of the overlay network in the Cisco SD-Access architecture?
A. It provides multicast support to enable Layer 2 flooding capability in the underlay network.
B. It provides isolation among the virtual networks and independence from the physical network.
C. It uses a traditional routed access design to provide performance and high availability to the network.
D. It consists of a group of physical routers and switches that are used to maintain the network.
Answer: B
NEW QUESTION 1182
What gives priority on an egress interface, for database traffic that connected on an ingress interface, without changing the CoS value?
A. QoS group
B. policy map
C. CoS map
D. class map
Answer: B
NEW QUESTION 1183
In which way are EIGRP and OSPF similar?
A. Both protocols support autosummarization.
B. Both protocols use hello packets to discover neighbors.
C. Both protocols support unequal-cost load balancing.
D. Both protocols send updates using unicast addresses.
Answer: B
NEW QUESTION 1184
What is a difference between TCAM and the MAC address table?
A. The MAC address table supports partial matches. TCAM requires an exact match.
B. TCAM is used to make Layer 2 forwarding decisions. CAM is used to build routing tables.
C. The MAC address table is contained in CAM. ACL and QoS information is stored in TCAM.
D. Router prefix lookups happens in CAM. MAC address table lookups happen in TCAM.
Answer: C
NEW QUESTION 1185
An engineer uses the Design workflow to create a new network infrastructure in Cisco DNA Center. How is the physical network device hierarchy structured?
A. by organization
B. by hostname naming convention
C. by location
D. by role
Answer: C
NEW QUESTION 1186
What are two characteristics of vManage APIs? (Choose two.)
A. Northbound API is based on RESTCONF and JSON.
B. Southbound API is based on NETCONF and XML.
C. Southbound API is based on RESTCONF and JSON.
D. Southbound API is based on OMP and DTLS.
E. Northbound API is RESTful using JSON.
Answer: BE
NEW QUESTION 1187
Which API does Cisco DNA Center use to retrieve information about images?
A. SWIM
B. Img-Mgmt
C. PnP
D. Client Health
Answer: A
NEW QUESTION 1188
What is a characteristic of the Cisco DNA Center Template Editor feature?
A. It provides a high-level overview of the health of every network device.
B. It facilitates software upgrades to network devices from a central point.
C. It uses a predefined configuration through parameterized elements or variables.
D. It facilitates a vulnerability assessment of the network devices.
Answer: C
NEW QUESTION 1189
Which tunnel type allows clients to perform a seamless Layer 3 roam between a Cisco AireOS WLC and a Cisco IOS XE WLC?
A. CAPWAP
B. IPsec
C. VPN
D. Ethernet over IP
Answer: A
NEW QUESTION 1190
What is a characteristic of vManage?
A. It leverages the overlay management protocol to interface with WAN Edge devices.
B. It supports protocols such as OSPF to integrate with legacy network devices.
C. It requires a public IP address to allow WAN Edge devices to discover fabric components.
D. It uses NETCONF to configure vSmart devices to build the overlay network data plane.
Answer: D
NEW QUESTION 1191
What is the purpose of data modeling languages?
A. to describe a data schema convertible into any data encoding format
B. to provide a framework to describe data flow patterns in networks
C. to specify algorithms necessary to decode binary-encoded protocol data units
D. to translate encoded data for interoperability between different CPU architectures
Answer: A
NEW QUESTION 1192
Which characteristic applies to a traditional WAN solution but not to a Cisco SD-WAN solution?
A. Time consuming configuration and maintenance.
B. Centralized reachability, security, and application policies.
C. Low complexity and increased overall solution scale.
D. Operates over DTLS/TLS authenticated and secured tunnels.
Answer: A
NEW QUESTION 1193
Which policy feature is used with TrustSec to provide endpoint entitlement in an enterprise network?
A. security group tags
B. access control lists
C. virtual local area network
D. virtual routing and forwarding
Answer: A
NEW QUESTION 1194
……
New 2020 CCIE/CCNP 350-401 ENCOR exam questions from PassLeader 350-401 dumps! Welcome to download the newest PassLeader 350-401 VCE and PDF dumps: https://www.passleader.com/350-401.html (1198 Q&As –> 1239 Q&As) [Lab Simulations Available]
P.S. Free 2020 CCIE/CCNP 350-401 ENCOR dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=1nv6C6Az-yuR5kOXg8FV3gytDer_usQBX
