New 2020 CCNP 300-430 ENWLSI exam questions from PassLeader 300-430 dumps! Welcome to download the newest PassLeader 300-430 VCE and PDF dumps: https://www.passleader.com/300-430.html (172 Q&As –> 268 Q&As –> 283 Q&As)
P.S. Free 2020 CCNP 300-430 ENWLSI dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=1zNj1Cg4_iYi7MWrnt4uzla7Cw3XLnlie
NEW QUESTION 154
An enterprise has recently deployed a voice and video solution available to all employees using AireOS controllers. The employees must use this service over their laptops, but users report poor service when connected to the wireless network. The programs that consume bandwidth must be identified and restricted. Which configuration on the WLAN aids in recognizing the traffic?
A. NetFlow Monitor
B. AVC Profile
C. QoS Profile
D. Application Visibility
Answer: B
NEW QUESTION 155
A multitenant building contains known wireless networks in most of the suites. Rogues must be classified in the WLC. How are the competing wireless APs classified?
A. adhoc
B. friendly
C. malicious
D. unclassified
Answer: A
NEW QUESTION 156
An engineer is implementing RADIUS to restrict administrative control to the network with the WLC management IP address of 192.168.1.10 and an AP subnet of 192.168.2.0/24. Which entry does the engineer define in the RADIUS server?
A. administrative access defined on the WLC and the network range 192.168.2.0/255.255.254.0
B. NAS entry of the virtual interface and the network range 192.168.2.0/255.255.255.0
C. shared secret defined on the WLC and the network range 192.168.1.0/255.255.254.0
D. WLC roles for commands and the network range 192.168.1.0/255.255.255.0
Answer: A
NEW QUESTION 157
An enterprise has recently deployed a voice and video solution available to all employees using AireOS controllers. The employees must use this service over their laptops, but users report poor service when connected to the wireless network. The programs that consume bandwidth must be identified and restricted. Which configuration on the WLAN aids in recognizing the traffic?
A. NetFlow Monitor
B. AVC Profile
C. QoS Profile
D. Application Visibility
Answer: D
NEW QUESTION 158
An engineer is responsible for a wireless network for an enterprise. The enterprise has distributed offices around the globe, and all APs are configured in FlexConnect mode. The network must be configured to support 802.11r and CCKM. What needs to be implemented to accomplish this goal?
A. Enable VLAN-based central switching.
B. Enable FlexConnect local authentication.
C. Enable FlexConnect local switching.
D. Create FlexConnect groups.
Answer: D
NEW QUESTION 159
An engineer is managing a wireless network for a shopping center. The network includes a Cisco WLC, a Cisco MSE, and a Cisco Prime Infrastructure. What is required to use Cisco CMX Location Analytics?
A. Enable tracking parameters in Cisco MSE.
B. Enable Context Aware and CMX Browser Engage.
C. Install Cisco Prime Infrastructure with floor maps.
D. Install Cisco Prime Infrastructure with floor maps.
Answer: B
NEW QUESTION 160
An engineer configures a deployment to support:
– Cisco CMX
– licenses for at least 3000 APs
– 6000 wIPS licenses
The Cisco vMSE appliance must be sized for this deployment. Which Cisco vMSE Release 8 option must the engineer deploy?
A. Large vMSE
B. Low-End vMSE
C. Standard vMSE
D. High-End vMSE
Answer: D
NEW QUESTION 161
A Cisco CMX 3375 appliance on the 10.6.1 version code counts duplicate client entries, which creates wrong location analytics. The issue is primarily from iOS clients with the private MAC address feature enabled. Enabling this feature requires an upgrade of the Cisco CMX 3375 appliance in a high availability pair to version 10.6.3. SCP transfers the Cisco CMX image, but the upgrade script run fails. Which configuration change resolves this issue?
A. Upgrade the high availability pair to version 10.6.2 image first and then upgrade to version 10.6.3.
B. Save configuration and use the upgrade script to upgrade the high availability pair without breaking the high availability.
C. Break the high availability using the cmxha config disable command and upgrade the primary and secondary individuality.
D. Run root patch to first upgrade to version 10.6.2 and then migrate to version 10.6.3.
Answer: C
NEW QUESTION 162
An engineer has implemented advanced location services for a retail wireless deployment. The marketing department wants to collect user demographic information in exchange for guest WLAN access and to have a customized portal per location hosted by the provider. Which social connector must be tied into Cisco CMX to provide this service?
A. Gmail
B. Google+
C. Facebook
D. MySpace
Answer: C
NEW QUESTION 163
What are two considerations when deploying a Cisco Hyperlocation? (Choose two.)
A. NTP configuration is available, but not recommended.
B. The Cisco Hyperlocation feature must be enabled only on the wireless LAN controller.
C. After enabling Cisco Hyperlocation on Cisco CMX, the APs and the wireless LAN controller must be restarted.
D. The Cisco Hyperlocation feature must be enabled on the wireless LAN controller and Cisco CMX.
E. If the Cisco CMX server is a VM, a high-end VM is needed for Cisco Hyperlocation deployments.
Answer: CD
NEW QUESTION 164
An engineer has implemented 802.1x authentication on the wireless network utilizing the internal database of a RADIUS server. Some clients reported that they are unable to connect. After troubleshooting, it is found that PEAP authentication is failing. A debug showed the server is sending an Access-Reject message. Which action must be taken to resolve authentication?
A. Use the user password that is configured on the server.
B. Disable the server certificate to be validated on the client.
C. Update the client certificate to match the user account.
D. Replace the client certificates from the CA with the server certificate.
Answer: C
NEW QUESTION 165
A customer wants to allow employees to easily onboard their personal devices to the wireless network. The visitors also must be able to connect to the same network without the need to engage with anyone from the reception desk. Which process must be configured on Cisco ISE to support this requirement?
A. MAC authentication bypass
B. native supplicant provisioning
C. local web auth
D. self-registration guest portal
Answer: D
NEW QUESTION 166
A customer has a distributed wireless deployment model where the WLCs are located in the data centers. Because the file servers are located in the data center, the traffic from the corporate WLAN “Corp-401266017” must go through the controllers, where the guest WLAN “Guest-19283746” traffic must use the local Internet line installed in each office. Which configuration will accomplish this task?
A. Disable Local Switching for the corporate and guest WLAN.
B. Disable Local Switching for the corporate WLAN and enable it for the guest WLAN.
C. Enable Local Switching for the corporate and guest WLAN.
D. Enable Local Switching for the corporate WLAN and disable it for the guest WLAN.
Answer: D
NEW QUESTION 167
A multitenant building contains known wireless networks in most of the suites. Rogues must be classified in the WLC. How are the competing wireless APs classified?
A. adhoc
B. friendly
C. malicious
D. unclassified
Answer: B
NEW QUESTION 168
An engineer must configure Cisco OEAPs for three executives. As soon as the NAT address is configured on the management interface, it is noticed that the WLC is not responding for APs that are trying to associate to the internal IP management address. Which command should be used to reconcile this?
A. config flexconnect office-extend nat-ip-only disable
B. config network ap-discovery nap-ip-only enable
C. config flexconnect office-extend nat-ip-only enable
D. config network ap-discovery nat-ip-only disable
Answer: C
NEW QUESTION 169
After receiving an alert about a rogue AP, a network engineer logs into Cisco Prime Infrastructure and looks at the floor map where the AP that detected the rogue is located. The map is synchronized with a mobility services engine that determines that the rogue device is actually inside the campus. The engineer determines that the rogue is a security threat and decides to stop if from broadcasting inside the enterprise wireless network. What is the fastest way to disable the rogue?
A. Go to the location where the rogue device is indicated to be and disable the power.
B. Create an SSID similar to the rogue to disable clients from connecting to it.
C. Update the status of the rogue in Cisco Prime Infrastructure to contained.
D. Classify the rogue as malicious in Cisco Prime Infrastructure.
Answer: C
NEW QUESTION 170
Which customizable security report on Cisco Prime Infrastructure will show rogue APs detected since a point in time?
A. Network Summary
B. Rogue APs Events
C. New Rogue APs
D. Rogue APs Count Summary
Answer: A
NEW QUESTION 171
……
New 2020 CCNP 300-430 ENWLSI exam questions from PassLeader 300-430 dumps! Welcome to download the newest PassLeader 300-430 VCE and PDF dumps: https://www.passleader.com/300-430.html (172 Q&As –> 268 Q&As –> 283 Q&As)
P.S. Free 2020 CCNP 300-430 ENWLSI dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=1zNj1Cg4_iYi7MWrnt4uzla7Cw3XLnlie
