New 300-101 exam questions from PassLeader 300-101 dumps! Welcome to download the newest PassLeader 300-101 VCE and PDF dumps: https://www.passleader.com/300-101.html (894 Q&As)
P.S. Free 300-101 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpZEE0S2YxR3ZMUWs
NEW QUESTION 869
A network engineer wants to configure logging to compile and send information to an external server. Which type of logging must be configured?
A. console
B. syslog
C. buffer
D. terminal
Answer: B
NEW QUESTION 870
Which value identifies traffic intended for different paths in an EVN environment?
A. VLAN ID
B. route target
C. route tag
D. VNET tag
Answer: D
NEW QUESTION 871
Which command is the correct way to summarize routes that were injected into OSPF area 100 from RIP?
A. redistribute rip metric 20 subnets
B. summary-address 172.32.64.0 255.255.224.0
C. area 100 range 172.32.64.0 255.255.224.0
D. ip summary-address 172.32.64.0 255.255.224.0
Answer: B
NEW QUESTION 872
By default, what is the maximum number of equal-metric paths that BGP uses for load balancing?
A. 1
B. 2
C. 4
D. 8
Answer: D
NEW QUESTION 873
Which difference in the packet fragmentation feature between IPv4 and IPv6 devices is true?
A. Unlike IPv4 routers. IPv6 routers cannot fragment packets by default.
B. Only IPv6 packets can be fragmented at the destination.
C. Only IPv4 headers support the more fragments bit.
D. Only IPv6 headers support the DF bit.
Answer: A
NEW QUESTION 874
Which logical operator do you use to ensure that the status of an object track list is up only when all configured objects are up?
A. and
B. or
C. true
D. xor
Answer: A
NEW QUESTION 875
Which feature is not supported when fast-switched PBR is in use?
A. the set ip next-hop interface command
B. matching IP addresses to a named ACL
C. matching IP addresses to a prefix list
D. the set ip default next-hop command
Answer: D
NEW QUESTION 876
A network engineer replaced a bad router with a spare, used router in an OSPF network. After the replacement, OSPF neighborship is not being established on one of the interfaces. Which two reasons cause this issue? (Choose two.)
A. authentication mismatch
B. MTU mismatch
C. OSPF process numbers do not match on both neighbor routers
D. OSPF timers match
E. area numbers match
Answer: BC
NEW QUESTION 877
Which limitation is introduced when you deploy RIPv2 on a network that uses supernet advertisement?
A. RIPv2 supports only classful supernet networks.
B. RIPv2 supports only supernet component networks that use VLSM.
C. Supernets are not supported in a RIFV2 environment.
D. RIPv2 supports only classless supernet networks.
Answer: A
NEW QUESTION 878
When configuring DHCP on a Cisco router what is the function of DHCP Option 82?
A. wireless access point registration to the DHCP server
B. to be an IP DHCP relay agent
C. dynamic DHCP ARP inspection
D. IP DHCP snooping
E. Cisco phone registration to the DHCP server
Answer: B
NEW QUESTION 879
Which protocol allows hosts to rearrange out-of-order packets at Layer 3?
A. Use UDP, which sequences packets and can place them in the correct order.
B. Use TCP, which works with the STP root bridge to transmit packets in the correct order.
C. Use TCP, which sequences packets and can place them in the correct order.
D. Use UDP, which can retransmit missing packets.
Answer: C
NEW QUESTION 880
Which security level is supported throughout all SNMP versions?
A. authPriv
B. authNoPriv
C. noAuthNoPriv
D. noAuthoPriv
Answer: C
NEW QUESTION 881
Which two statements about PAP and CHAP authentication are true? (Choose two.)
A. PAP uses a challenge string from the server to the client.
B. PAP can query a TACACS+ server to verify access credentials.
C. CHAP requires the client to supply a username and optional password.
D. PAP requires the client to supply a username and optional password.
E. CHAP uses a challenge string from the server to the client.
Answer: BE
NEW QUESTION 882
Under which circumstance can TCP starvation occur?
A. when HTTP and HTTPS traffic are transmitted on the same link
B. when TCP and UDP traffic are mixed in the same class of service
C. when DNS TFTP traffic are transmitted on the same link
D. when UDP traffic is processed in a policy-map before TCP traffic
E. when TCP traffic is blocked by an ACL
Answer: D
NEW QUESTION 883
Which protocols support DMVPN?
A. EIGRP
B. RIP2
C. OSPF
D. BGP
E. ISIS
Answer: ACD
Explanation:
Some documents say RIPv2 also supports DMVPN but, EIGPR, OSPF and BGP are the better choices, so we should choose them. Several routing protocols can be used in a DMVPN design, including:
– Enhanced Interior Gateway Protocol (EIGRP)
– Open Shortest Path First (OSPF)
– Routing Information Protocol version 2 (RIPv2)
– Border Gateway Protocol (BGP)
– On-Demand Routing (ODR)
https://www.cisco.com/c/dam/en/us/products/collateral/security/dynamic-multipoint-vpn-dmvpn/dmvpn_design_guide.pdf#wp37674
https://www.networkcomputing.com/networking/cisco-dmvpn-choosing-right-routing-protocol/1432661326
NEW QUESTION 884
Drag and Drop
Drag the items on the left to the proper locations on the right.
Answer:
NEW QUESTION 885
Drag and Drop
Drag and drop the statements about NAT64 from the left onto the correct NAT64 types on the right.
Answer:
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_nat/configuration/xe-3s/nat-xe-3s-book/iadnat-stateful-nat64.pdf
NEW QUESTION 886
To enable policy-based routing, which function specifies the match criteria and resulting action of all the match clauses that are met?
A. class map
B. route map
C. service policy
D. ACL
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios/12_2/qos/configuration/guide/fqos_c/qcfpbr.pdf
NEW QUESTION 887
What would you configure on SNMPv3 to allow authentication?
A. authpriv
B. authnopriv
C. noauthnopriv
D. authmember
Answer: A
Explanation:
The SNMPv3 Agent supports the following set of security levels:
– NoAuthnoPriv: Communication without authentication and privacy.
– AuthNoPriv: Communication with authentication and without privacy. The protocols used for Authentication are MD5 and SHA (Secure Hash Algorithm).
– AuthPriv: Communication with authentication and privacy. The protocols used for Authentication are MD5 and SHA ; and for Privacy, DES (Data Encryption Standard) and AES (Advanced Encryption Standard) protocols can be used. For Privacy Support, you have to install some third-party privacy packages.
NEW QUESTION 888
Which algorithm is used by EIGRP to determine the best path through a network?
A. DUAL
B. Dijkstra
C. SPF
D. A* Search
Answer: A
NEW QUESTION 889
What happens when a router receives a packet with a TTL of 0?
A. The router attempts to forward the packet along an alternate path in the route table.
B. The router sends an ICMP Time Exceeded Message to the host that sent the packet.
C. The router sends an ICMP Destination Unreachable Message to the host that sent the packet.
D. The router flags the packet and forwards it to the next hop.
Answer: B
NEW QUESTION 890
Which OSPF network type uses a DR?
A. point-to-point nonbroadcast
B. point-to-multicast
C. nonbroadcast multiaccess
D. point-to-point
Answer: C
NEW QUESTION 891
Which two tasks must you perform when you install SSH on a Cisco IOS device? (Choose two.)
A. Enable TACACS+
B. Delete the VTY lines
C. Generate an SSH key
D. Configure a device hostname
E. Disable Telnet
Answer: CD
NEW QUESTION 892
……
New 300-101 exam questions from PassLeader 300-101 dumps! Welcome to download the newest PassLeader 300-101 VCE and PDF dumps: https://www.passleader.com/300-101.html (894 Q&As)
P.S. Free 300-101 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpZEE0S2YxR3ZMUWs
