New 300-165 exam questions from PassLeader 300-165 dumps! Welcome to download the newest PassLeader 300-165 VCE and PDF dumps: https://www.passleader.com/300-165.html (349 Q&As)
P.S. New 300-165 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpMVRmUUJZRWU3cU0
Read More CCNP Data Center Exam Dumps:
CCNP Data Center 300-160 Exam Dumps: http://www.ciscovceplus.com/?s=300-160
CCNP Data Center 300-170 Exam Dumps: http://www.ciscovceplus.com/?s=300-170
CCNP Data Center 300-175 Exam Dumps: http://www.ciscovceplus.com/?s=300-175
CCNP Data Center 300-180 Exam Dumps: http://www.ciscovceplus.com/?s=300-180
NEW QUESTION 333
Which statement about fabric binding is true?
A. It can be distributed by CFS.
B. It binds devices at the interface level.
C. It learns about switches or devices that are logging in if learning mode is enabled.
D. Binding is based on Switch World Wide Names and domain ID.
Answer: B
NEW QUESTION 334
Cisco recommends which HSRP configuration when implementing LISP?
A. HSRP hello messages must be forwarded across data centers to create an active/active HSRP configuration.
B. HSRP groups and HSRP VIPs in all data centers in the extended LAN must be the same.
C. HSRP groups must be configured with unique MAC addresses to allow for dynamic EIDs.
D. HSPR must be set up as active-standby across data centers.
Answer: A
NEW QUESTION 335
What is a benefit of using the rollback feature in Cisco NX-OS as compared to saving a copy of the running configuration in the bootflash?
A. Checkpoints ensure configuration integrity.
B. Up to 1000 checkpoints can be created per device.
C. Checkpoints have a description field to add a description.
D. Checkpoints are stored on a remote FTP server.
Answer: A
NEW QUESTION 336
In FCoE, what are three functions of the FIP protocol? (Choose three.)
A. communication performance
B. FCoE packet policing
C. link configuration
D. virtual link maintenance
E. virtual link instantiation
F. discovery
Answer: ADF
NEW QUESTION 337
On a Cisco Nexus 5500 Series switch, what is the result of running the (config-if)# switchport mode vntag command?
A. allows the connected FEX to assign each VM a dedicated vEthernet interface on the host switch
B. allows the connected server to assign each VM a dedicated vEthernet interface on the host switch
C. allows the connected server to assign each VM a dedicated Ethernet interface on the host switch
D. allows the connected FEX to assign each VM a dedicated Ethernet interface on the host switch
Answer: A
NEW QUESTION 338
Which should you run to configure HSRP on a Cisco Nexus 7000 Series switch?
A. feature-set hsrp
interface vlan100
ip address 10.1.1.1 255.255.255.0
hsrp version 2
hsrp 100
ip 10.1.1.1
B. interface vlan100
ip address 10.1.1.2 255.255.255.0
hsrp 100
ip 10.1.1.1
C. feature hsrp
interface vlan100
ip address 10.1.1.2 255.255.255.0
hsrp 1000
ip 10.1.1.1
D. feature hsrp
interface vlan100
ip address 10.1.1.2 255.255.255.0
hsrp version 2
hsrp 1000
ip 10.1.1.1
Answer: C
NEW QUESTION 339
You are troubleshooting the SAN fabric. You must find the FCID to WWPN mapping for the N ports of a Cisco MDS Series switch. Which two commands can you run? (Choose two.)
A. show flogi database
B. show vsan
C. show fcip summary
D. show fcns database
E. show fspf database
Answer: AD
NEW QUESTION 340
You have two switches that have an ISL between them and use a SAN port channel. One of the switches is configured to use active mode. To which mode can you configure the peer switch to ensure that the SAN port channel is functional?
A. active or passive
B. active or on
C. active or F
D. passive or E
Answer: A
NEW QUESTION 341
Which action causes a Cisco Nexus switch to generate a system checkpoint automatically?
A. disabling a currently enabled feature
B. adding a new license to the switch
C. creating a new VRF
D. creating a new VDC
Answer: A
NEW QUESTION 342
When implementing VLAN 10 on multiple Cisco Nexus 5600 Series, which configuration is required to ensure that the full zone set and the active zone set are the same across the fabric?
A. switch(config)# zoneset activate name ZONE10 vsan 10
B. switch(config)# zoneset distribute full vsan 10
C. switch(config)# zoneset distribute vsan 33
D. switch(config)# zone-attribute-group name ATTR1 vsan 10
E. switch(config-attribute-group)# broadcast
Answer: A
NEW QUESTION 343
Which option is supported when configuring a VACL?
A. redirect to a SPAN destination port
B. log of traffic that is matched by a VACL by using a MAC ACL
C. egress VACL that contains decapsulated VXLAN traffic
D. access map entry that uses an IP or MAC ACL
Answer: A
NEW QUESTION 344
Drag and Drop
You must recover your configuration on a Cisco MDS 9000 Series switch from a previous version that was backed up to bootflash and then verify the restoration. Drag and drop the commands on the left to the correct order on the right.
Answer:
NEW QUESTION 345
Drag and Drop
Drag and drop each OTV component on the left to the correct description on the right.
Answer:
NEW QUESTION 346
……
New 300-165 exam questions from PassLeader 300-165 dumps! Welcome to download the newest PassLeader 300-165 VCE and PDF dumps: https://www.passleader.com/300-165.html (349 Q&As)
P.S. New 300-165 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpMVRmUUJZRWU3cU0
Read More CCNP Data Center Exam Dumps:
CCNP Data Center 300-160 Exam Dumps: http://www.ciscovceplus.com/?s=300-160
CCNP Data Center 300-170 Exam Dumps: http://www.ciscovceplus.com/?s=300-170
CCNP Data Center 300-175 Exam Dumps: http://www.ciscovceplus.com/?s=300-175
CCNP Data Center 300-180 Exam Dumps: http://www.ciscovceplus.com/?s=300-180
