New 2020 CCIE/CCNP 350-601 DCCOR exam questions from PassLeader 350-601 dumps! Welcome to download the newest PassLeader 350-601 VCE and PDF dumps: https://www.passleader.com/350-601.html (364 Q&As –> 560 Q&As –> 586 Q&As)
P.S. Free 2020 CCIE/CCNP 350-601 DCCOR dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=16SwPYpjzxvQMbuKlZPRfVuDBuCz9QbMq
NEW QUESTION 346
An engineer must configure OSPFv2 connectivity between a pair of Cisco Nexus switches. The connection between the switches must meet these requirements:
– Use unicast for updates.
– Use decentralized communication of updates.
– Full adjacency between switches.
Which configuration is needed to meet these requirements?
A. interface with a type of p2p network
B. stub area between the neighbors
C. filter list between the neighbors
D. virtual link between the neighbors
Answer: A
NEW QUESTION 347
An engineer must perform a backup operation of the Cisco UCS system. The backup must be transferred to a secure location using UDP and must contain information about VLANs, VSANs, and other policies. Also, the operations team requires the backup file to be in a human-readable format. Which configuration set meets these requirements?
A. Type: System configuration
Protocol: SCP
B. Type: Logical configuration
Protocol: TFTP
C. Type: All configuration
Protocol: FTP
D. Type: Full state
Protocol: SFTP
Answer: B
NEW QUESTION 348
A Cisco ACI engineer must configure an access port on a Cisco ACI leaf switch. The access policy should be configured so that it supports L30ut connectivity concurrently with several EPGs that are mapped to this interface with the static port method. How should the access policy be configured?
A. by linking the interface policy group to multiple Attachable Access Entity Profiles
B. with a single Attachable Access Entity Profile that is linked to the corresponding routed domain and physical domain
C. with two interface policy groups that are linked to the same interface profile port selector
D. by mapping a single physical domain, mapped to the L3out and EPG interfaces
Answer: B
NEW QUESTION 349
An engineer must configure the order in which the server attempts to boot from available boot device types using Cisco Integrated Management Controller (Cisco IMC). The engineer must change the boot order configuration during the setup and apply the new requirements multiple times. The requirement is to change the Cisco IMC actual boot order so it is different from the configured boot order. Which setting accomplishes this goal?
A. Enable the system to boot with the configured boot order.
B. Set the boot configuration directly through BIOS.
C. Configure the legacy and precision boot order to be mutually exclusive.
D. Apply UEFI Secure Boot for a nonsupported operating system.
Answer: B
Explanation:
https://www.cisco.com/en/US/docs/unified_computing/ucs/c/sw/gui/config/guide/1.5/b_Cisco_UCS_C-series_GUI_Configuration_Guide.151_chapter_011.html
NEW QUESTION 350
An engineer is performing an ISSU upgrade on the Cisco MDS 9000 Series Switch. What is the impact on the control plane of the switch?
A. It remains down until the next reboot.
B. It remains up throughout the update.
C. It remains down for more than 80 seconds but less than 140 seconds.
D. It is down for less than 80 seconds.
Answer: D
NEW QUESTION 351
An engineer must perform a software upgrade on a production Cisco Nexus 7000 Series Switch. Before the upgrade activity, the requirement is for all ports to be shut down and routing protocols to terminate gracefully. Which feature must be used to meet these requirements?
A. Configuration Profile
B. Maintenance Mode Profile
C. Switch Profile
D. Service Profile Template
Answer: B
NEW QUESTION 352
When deploying a Cisco HyperFlex edge with a pair of switches, what is the minimum number of interfaces in trunk mode required on each HX node?
A. 1
B. 2
C. 4
D. 6
Answer: B
NEW QUESTION 353
What is a characteristic of the NFS protocol?
A. It is used for booting Cisco UCS B-Series servers.
B. It is used to access a storage array at a block level.
C. It uses UDP and HTTP as its transport.
D. It uses remote procedure calls with TCP/IP for transport.
Answer: D
NEW QUESTION 354
A customer asks an engineer to develop a framework that will be used to replace the process of the manual device configuration of Cisco NX-OS devices. The engineer plans to use the programmatic interface that meets these requirements:
– The development team is familiar with Windows-based scripting environment using PowerShell.
– The customer’s security requirements mandate the use of HTTPS transport.
Which solution must be used to meet these requirements?
A. NX-API
B. VISORE
C. Open Agent Container
D. NETCONF-YANG
Answer: A
NEW QUESTION 355
Which NFS version uses the TCP protocol and needs only one IP port to run the service?
A. NFSv1
B. NFSv2
C. NFSv3
D. NFSv4
Answer: D
NEW QUESTION 356
What is a benefit of independent resource scaling in Cisco HyperFlex hybrid architecture?
A. flexible expansion of compute, caching, and capacity
B. remote booting of converged servers
C. multivendor converged node hardware support
D. support for compute nodes with third-party storage
Answer: D
NEW QUESTION 357
An engineer mus! send JSON encoded telemetry data to an external collector. The transport mechanism must prevent tampenng or forgery of the data. Which protocol accomplishes this goal?
A. GPB
B. HTTP
C. gRPC
D. DTLS
Answer: B
NEW QUESTION 358
Which feature Is supported with an In-Service Software Upgrade on a Cisco Nexus 9000 Series Switch?
A. configuration changes during an upgrade
B. nondisruptive upgrades via nonstop forwarding
C. zero downtime downgrades via dual supervisor modules
D. upgrades to Individual modules and line cards
Answer: B
NEW QUESTION 359
Drag and Drop
Drag and drop the network assurance concepts from the left onto the corresponding benefits on the right.
Answer:
NEW QUESTION 360
Drag and Drop
An engineer mus! configure HSRP protocol on two Cisco Nexus 9000 Series Switches running a virtual port channel. In addition, the HSRP implementation must meet these requirements:
– It must allow more than 500 groups.
– Switch 1 must act as the primary switch.
– Both switches must use a user-defined hardware address.
Drag and drop the commands from the right to complete a configuration of the HSRP on the left. The commands are used more than once. Not all commands are used.
Answer:
NEW QUESTION 361
Drag and Drop
Drag and drop the keywords onto the URL request to collect all the subnets configured under tenant Production using a REST API. Not all options are used.
Answer:
NEW QUESTION 362
……
New 2020 CCIE/CCNP 350-601 DCCOR exam questions from PassLeader 350-601 dumps! Welcome to download the newest PassLeader 350-601 VCE and PDF dumps: https://www.passleader.com/350-601.html (364 Q&As –> 560 Q&As –> 586 Q&As)
P.S. Free 2020 CCIE/CCNP 350-601 DCCOR dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=16SwPYpjzxvQMbuKlZPRfVuDBuCz9QbMq
