This page was exported from PassLeader New Cisco Exam Dumps - CCNA, CCNP, CCIE, DevNet, CCDE Certification Exam Dumps VCE and PDF and Braindumps and Practice Tests [ https://www.ciscovceplus.com ]
Export date: Mon Mar 25 8:29:23 2024 / +0000 GMT

[12-Apr-2021] New 2020 CCNP 300-425 ENWLSD Dumps with VCE and PDF from PassLeader (Update Questions)


New 2020 CCNP 300-425 ENWLSD exam questions from PassLeader 300-425 dumps! Welcome to download the newest PassLeader 300-425 VCE and PDF dumps: https://www.passleader.com/300-425.html (113 Q&As --> 128 Q&As --> 205 Q&As)

P.S. Free 2020 CCNP 300-425 ENWLSD dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=1X22--aiXmqAyWKsfRjGzbqA6rxWtev9E

NEW QUESTION 96 An engineer at a global enterprise organization must ensure that a mesh deployment has the highest number of channels available to the backhaul regardless of region deployed. Which design meets this requirement?

A.    one controller per country code B.    redundant controllers in the least restrictive regulatory domain C.    redundant controllers in the most restrictive regulatory domain D.    one controller per continent

Answer: C Explanation: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/configguide/b_cg85/country_codes.html

NEW QUESTION 97 An enterprise is using two wireless controllers to support the wireless network. The data center is located in the head office. Each controller has a corporate WLAN configured with the name CoprNET390595865WLC-1 and Copr-NET6837l638WLC-2. The APs are installed using a round-robin approach to load balance the traffic. What should be changed on the configuration to optimize roaming?

A.    Move all access points to one controller and use the other as N-1 HA. B.    Use the same WLAN name for the corporate network on both controllers. C.    Move the controllers to an external data center with higher internet speeds. D.    Place the access points per floor on the same controller.

Answer: D

NEW QUESTION 98 An engineer is conducting a Layer 2 site survey. Which type of client must the engineer match to the survey?

A.    best client available B.    phone client C.    normal client D.    worst client available

Answer: C

NEW QUESTION 99 A wireless engineer is using Ekahau Site Survey to validate that an existing wireless network is operating as expected. Which type of survey should be used to identify the end-to-end network performance?

A.    spectrum analysis B.    passive C.    GPS assisted D.    active ping

Answer: A

NEW QUESTION 100 The wireless learn must configure a new voice SSID for optimized roaming across multiple WLCs with Cisco 8821 phones. Which two WLC settings accomplish this goal? (Choose two.)

A.    Configure mobility groups between WLCs. B.    Use Cisco Centralized Key Management for authentication. C.    Configure AP groups between WLCs. D.    Configure AVC profiles on the SSlD. E.    Use AVC to lag traffic voice traffic as best effort.

Answer: BE Explanation: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8821/english/adminguide/w88x_b_wireless-8821-8821ex-admin-guide/w88x_b_wireless-8821-8821ex-admin-guide_chapter_01.html

NEW QUESTION 101 An engineer is designing an outdoor mesh network to cover several sports fields. The core of the network is located In a building at the entrance of a sports complex. Which type of antenna should be used with the RAP for backhaul connectivity?

A.    5 GHz. 8-dBi omnidirectional antenna. B.    2.4 GHz. 8-dBi patch antenna. C.    2 4 GHz. 14-dBi omnidirectional antenna. D.    5 GHz. 14-dBi patch antenna.

Answer: A Explanation: The AP1524PS includes three radios: a 2.4 -GHz, a 5.8GHz, and a 4.9-GHz radio. The 2.4-GHz radio is for client access (nonpublic safety traffic) and the 4.9-GHz radio is for public safety client access traffic only. The 5.8-GHz radio can be used as the backhaul for both public safety and non-public safety traffic. https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-6/configuration-guide/b_cg76/b_cg76_chapter_010000001.html

NEW QUESTION 102 A customer has restricted the AP and antenna combinations for a design to be limited to one model integrated antenna AP for carpeted spaces and one model external antenna AP with high gam antennas tor industrial, maintenance, or storage areas. When moving between a carpeted area to an industrial area, the engineer forgets to change survey devices and surveys several Aps. Which strategy will reduce the negative impact of the design?

A.    Resurvey and adjust the design. B.    Deploy unsurveyed access points to the design. C.    Deploy the specified access points per area type. D.    increase the Tx power on incorrectly surveyed access points.

Answer: A

NEW QUESTION 103 An engineer is designing a wireless network to support nigh availability. The network will need to support the total number of APs and client SSO. Live services should continue to work without interruption during the failover. Which two requirements need to be incorporated into the design to meet these needs? (Choose two.)

A.    redundant vWLC B.    controller high availability pair with one of the WLCs having a valid AP count license C.    10 sec RTT D.    back-to-back direct connection between WLCs E.    WLC 7.5 code or more recent

Answer: BD

NEW QUESTION 104 An enterprise is using the wireless network as the main network connection for corporate users and guests. To ensure wireless network availability, two standalone controllers are installed in the head office APs are connected to the controllers using a round-robin approach to load balance the traffic. After a power cut, the wireless clients disconnect while roaming. An engineer tried to ping from the controller but fails. Which protocol needs to be allowed between the networks that the controllers are installed?

A.    IP Protocol 67 B.    IP Protocol 77 C.    IP Protocol 87 D.    IP Protocol 97

Answer: D

NEW QUESTION 105 An engineer must perform a pre deployment site survey. For a new building in a high-security area. The design must provide a primary signal RSSI of -65 dBM for the clients. Which two requirements complete this design? (Choose two.)

A.    site access B.    AP model C.    WLC model D.    HVAC access E.    number of clients

Answer: BE

NEW QUESTION 106 A network engineer is working on a predictive WLAN design. The new wireless network must support access to internet, email, voice, and the inventory database. To successfully support these services, which configuration must the engineer use for the signal strength levels and SNR on the planning tool?

A.    Signal strength of -67 dBm, 20-dB SNR and maximum 1 percent packet loss. B.    Signal strength of -67 dBm, 20-dB SNR and maximum 5 percent packet loss. C.    Signal strength of -67 dBm, 25-dB SNR and maximum 1 percent packet loss. D.    Signal strength of -70 dBm, 30-dB SNR and maximum 10 percent packet loss.

Answer: C Explanation: https://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057site-survey-guidelines-wlan-00.html

NEW QUESTION 107 An engineer performs a Layer 1 survey by using Metageek Chanatyzer only on the current operating channel. Which operating mode is configured for a Cisco CleanAir AP?

A.    local B.    sniffer C.    monitor D.    SE-connect

Answer: A Explanation: https://www.metageek.com/training/lessons/chanalyzer-clean-air.html

NEW QUESTION 108 During a wireless network design a customer requires wireless coverage on the perimeter of a building. But also wants to minimize signal leakage from the wireless network. Which antenna should be used to accomplish this design?

A.    patch B.    dipole C.    monopole D.    omnidirectional

Answer: C Explanation: https://www.mwrf.com/technologies/passive-components/article/21844577/cshaped-slot-servesuwb-antenna

NEW QUESTION 109 An enterprise has moved most services to the cloud, including email applications and real-time communication. Which feature must be enabled on the wireless network to improve the user experience?

A.    QoS B.    radio management C.    interference mitigation D.    fast secure roaming

Answer: D Explanation: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/Enterprise-Mobility-8-5-DesignGuide/Enterprise_Mobility_8-5_Deployment_Guide.pdf

NEW QUESTION 110 An engineer is designing a network deployment for a college with six buildings Each building must have a WLC located in the IDF to support the Aps. The wireless clients should be able to roam between the APs and the controllers. Which type of wireless architecture should be used?

A.    distributed B.    centralized C.    cloud D.    autonomous

Answer: A Explanation: https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/emob41dg/emob41dg-wrapper/ch2_Arch.html

NEW QUESTION 111 An engineer has deployed a group of APs in an auditorium and notices that the APs are showing high co-channel interference. Which profile is used to adjust the parameters for these high-density APs?

A.    RF profile. B.    QoS profile. C.    AVC profile. D.    ISE profile.

Answer: A Explanation: https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/87/b_wireless_high_client_density_design_guide.html

NEW QUESTION 112 ......


New 2020 CCNP 300-425 ENWLSD exam questions from PassLeader 300-425 dumps! Welcome to download the newest PassLeader 300-425 VCE and PDF dumps: https://www.passleader.com/300-425.html (113 Q&As --> 128 Q&As --> 205 Q&As)

P.S. Free 2020 CCNP 300-425 ENWLSD dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=1X22--aiXmqAyWKsfRjGzbqA6rxWtev9E

Post date: 2021-04-12 03:06:00
Post date GMT: 2021-04-12 03:06:00
Post modified date: 2023-11-16 03:22:29
Post modified date GMT: 2023-11-16 03:22:29
Powered by [ Universal Post Manager ] plugin. HTML saving format developed by gVectors Team www.gVectors.com