New 2020 CCIE/CCNP 350-501 SPCOR exam questions from PassLeader 350-501 dumps! Welcome to download the newest PassLeader 350-501 VCE and PDF dumps: https://www.passleader.com/350-501.html (195 Q&As –> 237 Q&As –> 270 Q&As –> 301 Q&As –> 329 Q&As –> 404 Q&As –> 466 Q&As) [Lab Simulations Available]
P.S. Free 2020 CCIE/CCNP 350-501 SPCOR dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=1Mposo1mfECAFRL11-QuNZJ05dC0ab_b8
NEW QUESTION 171
A service provider is using QoS to manage customer traffic over the MPLS backbone. Which three statements about the behavior of each MPLS QoS mode based on QoS policy in the service provider core are true? (Choose three.)
A. Uniform mode does not change the original CE IP packet markings.
B. Uniform mode changes the original CE IP packet markings.
C. Pipe mode does not change the original CE IP packet markings.
D. Pipe mode changes the original CE IP packet markings.
E. Short-pipe mode does not change the original CE IP packet markings.
F. Short-pipe mode changes the original CE IP packet markings.
Answer: BCE
NEW QUESTION 172
A network engineer is tasked with supporting traffic discrimination over MPLS traffic engineering tunnels. To allocate restricted bandwidth to a certain type of traffic with no QoS degradation, which technique must be used?
A. integrated services
B. MPLS TE Diff-Serv full allocation model
C. MPLS TE Diff-Serv Russian doll model
D. IP precedence
E. class of service
Answer: C
NEW QUESTION 173
In an MPLS VPN environment, the QoS making over the MPLS backbone must be different from the one that is received from the customer. The forwarding on the egress PE is based on the marking that is set by the ingress PE. Which null label and QoS mode can achieve this?
A. MPLS explicit null with pipe mode
B. MPLS implicit null with short pipe mode
C. MPLS implicit null with uniform mode
D. MPLS explicit null with uniform mode
E. MPLS explicit null with short pipe mode
F. MPLS implicit null with pipe mode
Answer: A
NEW QUESTION 174
Which two features will be used when defining SR-TE explicit path hops if the devices are using IP unnumbered interfaces? (Choose two.)
A. router ID
B. labels
C. node address
D. next hop address
E. output interface
Answer: BC
NEW QUESTION 175
A network team has failed to implement IS-IS multitopology. What is the reason for it?
A. The router did not support VRFs.
B. The routing process did not support extended metrics.
C. The router did not have Cisco Discovery Protocol and Cisco Express Forwarding disabled.
D. The routing process supported Level 1 only.
Answer: B
NEW QUESTION 176
A network engineer is implementing BFD configuration changes on a customer’s equipment. How is the bfd interval configuration on the interface disconnected?
A. The status of the interface changes.
B. The IPv4 or IPv6 address configuration on the interface changes.
C. It is automatically disconnected when the BFD-configured subinterface is removed.
D. It is automatically disconnected when the BFD main interface is removed.
Answer: D
NEW QUESTION 177
An engineer is trying to implement BGP in a multihomed architecture. What must the engineer configure to influence inbound path selection?
A. A route map with WEIGHT attribute to control the inbound traffic.
B. An offset list to set the metric for routes received from neighboring autonomous systems.
C. An access list to identify traffic and enable it on both of the provider-facing interfaces.
D. A route map with AS_PATH attribute to control the inbound traffic.
Answer: D
NEW QUESTION 178
Which three statements about the Cisco MPLS TE Fast Reroute (FRR) process are true? (Choose three.)
A. TE tunnels that are configured with the FRR option cannot be used as backup tunnels.
B. TE tunnels that are configured with the FRR option can be used as backup tunnels.
C. The backup tunnel that is used to protect a physical interface must have a valid IP address configured.
D. Interfaces must use MPLS global label allocation.
E. The source IP address of use backup tunnel and the merge point (MP) should not be reachable.
Answer: ACD
NEW QUESTION 179
Which control plane protocol is used between Cisco SD-WAN routers and vSmart controllers?
A. OTCP
B. OMP
C. UDP
D. BGP
Answer: B
NEW QUESTION 180
Which module refers to the network automation using Ansible?
A. the iosxr_system module to collect facts from remote devices
B. the iosxr_user module to manage banners for users in the local database
C. the losxr_logging module to run debugging for seventy levels 2 to 5
D. the iosxr_command module to issue run commands on remote devices
Answer: D
NEW QUESTION 181
An engineer began to configure LDP between R1 and R2, but R1 and R2 cannot yet establish an LDP TCP connection. Which additional task must be completed to finish the implementation?
A. Configure the mpls Idp neighbor 172.16.0.1 password command on R1.
B. Configure the mpls Idp neighbor 10.0.12.1 password command on R1.
C. Configure the no mpls Idp password option 1 command on R2.
D. Configure the no mpls Idp password option 1 command on R1.
Answer: A
NEW QUESTION 182
BGP has been implemented on a IOS XR router. Which configuration sends BGP IPv4 labels to build inter-domain LSPs?
A. router bgp 65515 address-family ipv4 unicast neighbor 172.16.70.23 send-community extended
B. router bgp 65515 no bgp default ipv4-unicast
C. router bgp 65515 address-family ipv4 unicast neighbor 172.16.70.23 send-community
D. router bgp 65515 neighbor 172.16.70.23 address-family ipv4 labeled-unicast
Answer: D
NEW QUESTION 183
What are two characteristics of MPLS TE turrets? (Choose two.)
A. They require EIGRP to be running in the core.
B. They use RSVP to provide bandwidth for the tunnel.
C. They are run over Ethernet cores only.
D. The headend and tailend routes of the tunnel must have a BGP relationship E. They are unidirectional.
Answer: B
NEW QUESTION 184
A customer requests that sites are connected over an MPLS backbone using the MPLS AToM service. However, the network engineer advises that the MPLS L3VPN service may be better for this situation. Which characteristic of MPLS L3VPN may make it a better option from the Service Provider perspective?
A. Reduction of operational complexity.
B. Support for multiple network layer protocols, such as IP, IPX, and SNA.
C. CustomerLayer 2 information will be maintained over the service provider core.
D. Transparent to the customer.
Answer: A
NEW QUESTION 185
An engineer needs to implement QOS mechanism on customer’s network as some applications going over the internet are slower than others. Which two actions must the engineer perform when implementing traffic shaping on the network in order to accomplish this task? (Choose two.)
A. Configure a queue with sufficient memory to buffer excess packets.
B. Configure the token values in bytes.
C. Implement packet remarking for excess traffic.
D. Implement a scheduling function to handle delayed packets.
E. Configure a threshold over which excess packets are discarded.
Answer: AD
NEW QUESTION 186
What are two factors to consider when implementing NSR High Availability on an MPLS PE router? (Choose two.)
A. It consumes more memory and CPU resources than NSF.
B. It operates normally without NSR support on the PE peers.
C. It requires all PE-CE sessions to support NSR.
D. It requires routing protocol extensions.
E. It cannot sync state information across redundant RPs.
Answer: AB
NEW QUESTION 187
Which statement about TLS is accurate when using RESTCONF to write configurations on network devices’?
A. It requires certificates for authentication.
B. It is provided using NGINX acting as a proxy web server.
C. It is used for HTTP and HTTPS requests.
D. It is not supported on Cisco devices.
Answer: A
NEW QUESTION 188
What is the characteristic of the Tl-LFA?
A. It guarantees a loop-free path for all interfaces in the OSPf- super backbone.
B. It applies on each area and instance and makes all the interfaces inherit the configuration.
C. It guarantees a loop-free path for all areas configured m OSPF.
D. It applies only on the instance and makes at the interfaces inherit the configuration.
Answer: D
NEW QUESTION 189
The administrator of a small company network notices that intermittent network issues occasionally cause inbound notifications to its SNMP servers to be lost. Which configuration must the administrator apply so that the SNMP servers acknowledge the notifications that they receive?
A. snmp-server community ciscotest rw 10
B. snmp-server host tests.cisco.com public
snmp-server community ciscotest rw 10
C. snmp-server enable traps bgp
snmp-server host 192.169.2.1 informs
D. snmp-server enable traps snmp
Answer: C
NEW QUESTION 190
Which two actions describe ISP delegation to PCE servers? (Choose two.)
A. adding a new PCE server with lower precedence than the primary PCE
B. changing the precedence of any of the PCE servers
C. removing TE re-optimization timer timeouts
D. entering the mpls traffic-eng reoptimize command
E. adding a new PCE server with higher precedence than the primary PCE
Answer: AE
NEW QUESTION 191
Drag and Drop
Drag and drop the descriptions from the left onto the corresponding OS types on the right.
Answer:
NEW QUESTION 192
Drag and Drop
Drag and drop the OSPF and IS-IS Cisco MPLS TE extensions from the left to their functional descriptions on the right.
Answer:
NEW QUESTION 193
……
New 2020 CCIE/CCNP 350-501 SPCOR exam questions from PassLeader 350-501 dumps! Welcome to download the newest PassLeader 350-501 VCE and PDF dumps: https://www.passleader.com/350-501.html (195 Q&As –> 237 Q&As –> 270 Q&As –> 301 Q&As –> 329 Q&As –> 404 Q&As –> 466 Q&As) [Lab Simulations Available]
P.S. Free 2020 CCIE/CCNP 350-501 SPCOR dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=1Mposo1mfECAFRL11-QuNZJ05dC0ab_b8
