New 300-208 exam questions from PassLeader 300-208 dumps! Welcome to download the newest PassLeader 300-208 VCE and PDF dumps: http://www.passleader.com/300-208.html (430 Q&As –> 451 Q&As –> 508 Q&As –> 531 Q&As)
P.S. Free 300-208 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpfkFleG9jUGxxS3kwS0VwcllTWmlxdTlBZUd5cnBkaG5DSE5FbU5yOEpYQzQ
QUESTION 31
Which three components comprise the Cisco ISE profiler? (Choose three.)
A. the sensor, which contains one or more probes
B. the probe manager
C. a monitoring tool that connects to the Cisco ISE
D. the trigger, which activates ACLs
E. an analyzer, which uses configured policies to evaluate endpoints
F. a remitter tool, which fails over to redundant profilers
Answer: ABE
QUESTION 32
Which three statements about the Cisco ISE profiler are true? (Choose three.)
A. It sends endpoint data to AAA servers.
B. It collects endpoint attributes.
C. It stores MAC addresses for endpoint systems.
D. It monitors and polices router and firewall traffic.
E. It matches endpoints to their profiles.
F. It stores endpoints in the Cisco ISE database with their profiles.
Answer: BEF
QUESTION 33
From which location can you run reports on endpoint profiling?
A. Reports > Operations > Catalog > Endpoint
B. Operations > Reports > Catalog > Endpoint
C. Operations > Catalog > Reports > Endpoint
D. Operations > Catalog > Endpoint
Answer: B
QUESTION 34
Which two services are included in the Cisco ISE posture service? (Choose two.)
A. posture administration
B. posture run-time
C. posture monitoring
D. posture policing
E. posture catalog
Answer: AB
QUESTION 35
What is a requirement for posture administration services in Cisco ISE?
A. at least one Cisco router to store Cisco ISE profiling policies
B. Cisco NAC Agents that communicate with the Cisco ISE server
C. an ACL that points traffic to the Cisco ISE deployment
D. the advanced license package must be installed
Answer: D
QUESTION 36
Which two statements about Cisco NAC Agents that are installed on clients that interact with the Cisco ISE profiler are true? (Choose two.)
A. They send endpoint data to AAA servers.
B. They collect endpoint attributes.
C. They interact with the posture service to enforce endpoint security policies.
D. They block access from the network through noncompliant endpoints.
E. They store endpoints in the Cisco ISE with their profiles.
F. They evaluate clients against posture policies, to enforce requirements.
Answer: CF
QUESTION 37
What steps must you perform to deploy a CA-signed identify certificate on an ISE device?
A. 1. Download the CA server certificate.
2. Generate a signing request and save it as a file.
3. Access the CA server and submit the ISE request.
4. Install the issued certificate on the ISE.
B. 1. Download the CA server certificate.
2. Generate a signing request and save it as a file.
3. Access the CA server and submit the ISE request.
4. Install the issued certificate on the CA server.
C. 1. Generate a signing request and save it as a file.
2. Download the CA server certificate.
3. Access the ISE server and submit the CA request.
4. Install the issued certificate on the CA server.
D. 1. Generate a signing request and save it as a file.
2. Download the CA server certificate.
3. Access the CA server and submit the ISE request.
4. Install the issued certificate on the ISE.
Answer: D
QUESTION 38
What implementation must be added to the WLC to enable 802.1X and CoA for wireless endpoints?
A. the ISE
B. an ACL
C. a router
D. a policy server
Answer: A
QUESTION 39
What are the initial steps must you perform to add the ISE to the WLC?
A. 1. With a Web browser, establish an HTTP connection to the WLC pod.
2. Navigate to Administration > Authentication > New.
3. Enter server values to begin the configuration.
B. 1. With a Web browser, establish an FTP connection to the WLC pod.
2. Navigate to Security > Administration > New.
3. Add additional security features for FTP authentication.
C. 1. With a Web browser, establish an HTTP connection to the WLC pod.
2. Navigate to Authentication > New.
3. Enter ACLs and Authentication methods to begin the configuration.
D. 1. With a Web browser connect, establish an HTTPS connection to the WLC pod.
2. Navigate to Security > Authentication > New.
3. Enter server values to begin the configuration.
Answer: D
QUESTION 40
Which command configures console port authorization under line con 0?
A. authorization default|WORD
B. authorization exec line con 0|WORD
C. authorization line con 0|WORD
D. authorization exec default|WORD
Answer: D
QUESTION 41
Which two statements about administrative access to the ACS Solution Engine are true? (Choose two.)
A. The ACS Solution Engine supports command-line connections through a serial-port connection.
B. For GUI access, an administrative GUI user must be created with the add-guiadmin command.
C. The ACS Solution Engine supports command-line connections through an Ethernet interface.
D. An ACL-based policy must be configured to allow administrative-user access.
E. GUI access to the ACS Solution Engine is not supported.
Answer: BD
QUESTION 42
What is the purpose of the Cisco ISE Guest Service Sponsor Portal?
A. It tracks and stores user activity while connected to the Cisco ISE.
B. It securely authenticates guest users for the Cisco ISE Guest Service.
C. It filters guest users from account holders to the Cisco ISE.
D. It creates and manages Guest User accounts.
Answer: D
QUESTION 43
What is the effect of the ip http secure-server command on a Cisco ISE?
A. It enables the HTTP server for users to connect on the command line.
B. It enables the HTTP server for users to connect using Web-based authentication.
C. It enables the HTTPS server for users to connect using Web-based authentication.
D. It enables the HTTPS server for users to connect on the command line.
Answer: C
QUESTION 44
When RADIUS NAC and AAA Override are enabled for WLC on a Cisco ISE, which two statements about RADIUS NAC are true? (Choose two.)
A. It will return an access-accept and send the redirection URL for all users.
B. It establishes secure connectivity between the RADIUS server and the ISE.
C. It allows the ISE to send a CoA request that indicates when the user is authenticated.
D. It is used for posture assessment, so the ISE changes the user profile based on posture result.
E. It allows multiple users to authenticate at the same time.
Answer: CD
QUESTION 45
What are the initial steps to configure an ACS as a TACACS server?
A. 1. Choose Network Devices and AAA Clients > Network Resources.
2. Click Create.
B. 1. Choose Network Resources > Network Devices and AAA Clients.
2. Click Create.
C. 1. Choose Network Resources > Network Devices and AAA Clients.
2. Click Manage.
D. 1. Choose Network Devices and AAA Clients > Network Resources.
2. Click Install.
Answer: B
New 300-208 exam questions from PassLeader 300-208 dumps! Welcome to download the newest PassLeader 300-208 VCE and PDF dumps: http://www.passleader.com/300-208.html (430 Q&As –> 451 Q&As –> 508 Q&As –> 531 Q&As)
P.S. Free 300-208 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpfkFleG9jUGxxS3kwS0VwcllTWmlxdTlBZUd5cnBkaG5DSE5FbU5yOEpYQzQ
